Sharp MS702 - MiniDisc Recorder Operation Manual page 31

To change track names or
disc names
Some MiniDiscs created on other equip-
ment may have more than 100 characters
in a track name or disc name. The charac-
ters from the 101st character and on can-
not be corrected or changed.
To change characters:
1
Put the unit in the character input
mode.
To change characters in a disc name,
perform steps 1 - 2 on page 28.
To change characters in a track name,
5 4
perform steps 1 - 3 on page 29.
2
Press the or button to move
the cursor to the character you want to
change.
3
Enter the new character you want, and
press the ENTER/F.PLAY/SYNCHRO
button.
To delete characters:
1
Put the unit in the character input
mode.
To delete characters in a disc name,
perform steps 1 - 2 on page 28.
To delete characters in a track name,
5 4
perform steps 1 - 3 on page 29.
2
Press the or button to move
the cursor to the character you want to
delete.
3
Press the BASS/DEL button.
The character will be erased.
4
Press the ENTER/F.PLAY/SYNCHRO
button.
To add characters:
1
Put the unit in the character input
mode.
To add characters to a disc name, per-
form steps 1 - 2 on page 28.
To add characters to a track name, per-
5 4
form steps 1 - 3 on page 29.
2
Press the or button to move
the cursor to the right of the character,
where you want to add a new charac-
ter.
3
Press the MODE/INS button.
A space will be inserted.
4
Enter the new character you want, and
press the ENTER/F.PLAY/SYNCHRO
button.
Name/stamp
Master MiniDisc
(Prerecorded
MiniDisc)
1. The sound is recorded.
2. The character informa-
tion, such as the disc
name and track
names is transferred.
1
Record the sound from the master
MiniDisc onto a recordable MiniDisc.
Recording unit
Playback unit
The sound
is recorded.
Master MiniDisc Recordable MiniDisc
Refer to the standard
method. (Pages 8 to 12)
At this point, only the sound is
recorded. No character information is
transferred.
Continued on the following page.
30
MD-MS702
Recordable
MiniDisc
recording