Recording Using The Cable Included With The Unit - Sharp MS702 - MiniDisc Recorder Operation Manual

RECORDING USING THE CABLE INCLUDED WITH THE UNIT

Recording from CDs or MDs (Synchro recording)
Synchro recording is a method that detects the playback sound from the source
equipment. When sound is present, it automatically starts the recording. When the
source is silent, the recording will be paused.
1
Connect the external equipment.
(See page 8.)
2
Insert a recordable MiniDisc.
3
Press the REC button.
To record from a tuner, first tune in a
broadcast.
To record from a CD, first start playing
the track you want to record.
4
While playing sound from the external
5 4
equipment connected to this unit, press
the or button to adjust the
recording level.
Adjust the recording level so that the
maximum sound volume from the
source makes the reading swing some-
where between -4 dB and 0 dB.
To record from a CD, first adjust the
recording level. Then put the equip-
ment connected to this unit into the
playback stand-by mode.
5
Press the ENTER/F.PLAY/SYNCHRO
button.
Flashing
6
Begin playback on the source equip-
ment.
Recording will begin automatically.
To interrupt recording:
When the
stopped, the unit will enter the synchro
recording stand-by
playback is resumed, a recording will
be resumed.
If a silence lasts for 3 seconds or more,
the recording will be paused. 06
Pressing the
0dB
(when in this mode) will cause the unit
-4dB
to enter the recording stand-by mode
and cancel the synchro recording
mode.
Continued on the following page.
10
source equipment is
mode. When
button on this unit
MD-MS702