Jole chili spin 360 Instruction Manual
  1. Manuals
  2. Brands
  3. Jole Manuals
  4. Car Seat
  5. Spin 360
  6. Instruction manual

Jole chili spin 360 Instruction Manual

360 spin child restraint
Hide thumbs Also See for chili spin 360:
Table of Contents

Advertisement

Quick Links

Download this manual
chili spin 360
™
360° spin child restraint
Instruction Manual
Child height: less than 49 in. (125 cm)
Child weight: 4 to 65 lb. (1.8 to 30 kg)
installation
videos
Read all the instructions in this manual
before using the child restraint!
IS-2024-05-31

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the chili spin 360 and is the answer not in the manual?

Questions and answers

Aliza
April 7, 2025

I have the chili spin 360 and I would like to know if it’s possible to remove the straps on and the bottom plastic piece to clean. my daughter threw up and I’d like to clean it thoroughly to avoid any recurring smells.

User image 67f45aced73e9
0
1 comments:
Mr. Anderson
April 9, 2025

The straps should not be tampered with during cleaning, and there is no mention of removing the bottom plastic piece. Therefore, the straps and bottom plastic piece of the Jole Chili Spin 360 should not be removed for cleaning.

This answer is automatically generated

0

Related Manuals for Jole chili spin 360

Summary of Contents for Jole chili spin 360

  • Page 1 360 ™ 360° spin child restraint Instruction Manual Child height: less than 49 in. (125 cm) Child weight: 4 to 65 lb. (1.8 to 30 kg) installation videos Read all the instructions in this manual before using the child restraint!

  • Page 2: Table Of Contents

    Contents: Important Welcome to the Joie Family! If You Need Help Register Your Child Restraint Child Requirements Warnings Best Practices Vehicle Compatibility Vehicle Belts Choose your Installation LATCH Install Vehicle Belt Install Rear-Facing or Forward-Facing Requirements Parts List Headrest Height Adjustment Crotch Buckle Adjustment Adjusting Recline Removing Infant Insert...

  • Page 3: Important

    Important: Welcome to the Joie Family! Ensure your child’s safety – READ THIS MANUAL CAREFULLY! Although no child restraint can promise to protect in every situation, using it correctly reduces the chance of serious injury. Even if the child restraint seems easy, follow the step-by-step instructions in this book.
  • Page 4 Important: Register this Child Restraint Child restraints could be recalled for safety reasons. You must register this restraint to be reached in a recall. Send your name, address, e-mail address if available and the restraint’s model number and manufacturing date to 70 Thousand Oaks Blvd Morgantown, PA 19543 or call 1 (866) 798-7866 or register online at: www.joiebaby.com/carseatregistration...

  • Page 5: Child Requirements

    Child Requirements: This child restraint is for a child that meets BOTH of the following requirements: Weight: 4 to 65 lb. (1.8 to 30 kg) Height: less than 49 in. (125 cm) STOP using this child restraint as soon as the child reaches the max.

  • Page 6: Warnings

    WARNING! DEATH OR SERIOUS INJURY can occur if you fail to follow the warnings, instructions and labels on the child restraint. Read ALL INSTRUCTIONS before use of the • child restraint. • Read the vehicle owner’s manual for information on child restraint installation. KEEP INSTRUCTIONS FOR FUTURE USE.
  • Page 7 WARNING! DEATH OR SERIOUS INJURY can occur if you fail to follow the warnings, instructions and labels on the child restraint. • If an air bag inflates, it can hit the child and child restraint with great force and cause serious injury or death to your child.
  • Page 8 WARNING! DEATH OR SERIOUS INJURY can occur if you fail to follow the warnings, instructions and labels on the child restraint. • This restraint is certified for use only in passenger vehicles. This restraint is not certified for aircraft use, as aircraft belts will not accommodate proper installation of this restraint.
  • Page 9 WARNING! DEATH OR SERIOUS INJURY can occur if you fail to follow the warnings, instructions and labels on the child restraint. • Vehicle seat belt system MUST hold child restraint securely. Not all vehicle seat belts can be used with a child restraint. •...
  • Page 10 WARNING! DEATH OR SERIOUS INJURY can occur if you fail to follow the warnings, instructions and labels on the child restraint. NEVER use Harness Pads for children weighing • more than 40 lb. (18 kg). Harness Pads MUST be on TOP of the •...
  • Page 11 WARNING! DEATH OR SERIOUS INJURY can occur if you fail to follow the warnings, instructions and labels on the child restraint. NEVER attach two lower anchor connectors • to one vehicle lower anchor point unless specifically allowed by the vehicle manufacturer.
  • Page 12 WARNING! DEATH OR SERIOUS INJURY can occur if you fail to follow the warnings, instructions and labels on the child restraint. • NEVER use clothing or blankets that interfere with providing a properly tightened harness. An unsecured or improperly harnessed child can come out of the restraint during a crash.
  • Page 13 WARNING! NEVER use a child restraint that has been involved in a MODERATE or SEVERE crash. Even if there is no visible damage, the child restraint’s internal structure may be compromised, and may not protect your child in a future crash. Child Restraint is still usable after a minor incident which includes all of the following situations: 1) The vehicle was able to be driven away from...

  • Page 14: Best Practices

    Best Practices: Expiration: This child restraint expires 10 years from the date of manufacture. Stop using it after that date and dispose of it. Check the label on the back of the seat for the manufacture date. Hot Weather Warning: Child restraints can become extremely hot in the sun or warm weather.

  • Page 15: Vehicle Compatibility

    Vehicle Compatibility: You MUST read and understand ALL child restraint related instructions and warnings in your vehicle owner’s manual to correctly and safely use this child restraint in your vehicle. This child restraint can ONLY be installed on vehicle seats that face forward. DO NOT install in seats that face to the sides or rear of the vehicle.

  • Page 16: Vehicle Belts

    Vehicle Belts: These vehicle belts CANNOT BE USED with your child restraint. Install with lower anchors instead. 1-Motorized Belts (Automatic) These should not be used unless the shoulder belt can be removed, the lap belt is locked and use is allowed by the vehicle manufacturer.

  • Page 18: Choose Your Installation

    Choose Your Installation: This child restraint can be installed in your vehicle using either the vehicle seat belt OR the lower anchor attachment (LATCH). Both are equally safe to use. INSTALL USING ONLY ONE METHOD. LATCH Install: LATCH (Lower Anchor Attachment) with Tether: The LATCH system or lower anchor attachment and top tether allow you to securely attach your safety seat in your car without using the vehicle seat belt.

  • Page 19: Vehicle Belt Install

    Vehicle Belt Install: Vehicle Seat Belt: Refer to your vehicle owner’s manual to determine if the belts in your vehicle lock by switching the seat belt’s retractor OR have a locking latch plate that locks the vehicle’s seat belt. Vehicle Seat Belt Terms Retractor A device that winds up the unused vehicle seat belt.
  • Page 20 Lower Anchor Attachment Rear-Facing Requirements: + Tether Figure for Installation Child's Weight Installation Method Suitable For LATCH Child height less than 43 in. (110 cm) 5-40 lbs (2.26-18 kg) Child weight 4 - 40 lb. Figure for Installation Child's Weight (1.8 - 18 kg) Install PG.
  • Page 21 Forward-Facing Requirements: Lower Anchor Attachment + Tether Figure for Installation Child's Weight Installation Method Suitable For LATCH and Tether 30-65 lbs (13.6-30 kg) Child height less than Figure for Installation Child's Weight 49 in. (125 cm) Install PG. 54 Lap Belt Only + Tether Child weight 30 - 65 Lower Anchor Attachment Lap/Shoulder Belt...
  • Page 22 Parts List: Please make sure there are no missing parts. Please contact Joie Customer Service if anything is missing. Headrest Infant Head Insert Harness Covers Harness Straps Crotch Pad Harness Adjustment Strap Recline Adjustment Button Chest Clip Infant Insert Rotation Lever Belt Path Headrest Adjustment Lever Tether Strap...
  • Page 23 Parts List:...

  • Page 24: Headrest Height Adjustment

    Headrest Height Adjustment: For safety and comfort, ensure the harness straps fit snugly and are positioned correctly on your child’s shoulders. Locate the harness adjustment button (1) and press it down while pulling the shoulder harnesses (2) outward to loosen. Locate the Headrest Adjustment Lever and squeeze it while moving the headrest up or down until it locks into one of the 10 available positions.
  • Page 25 1 inch (2.5 cm)

  • Page 26: Crotch Buckle Adjustment

    Crotch Buckle Adjustment: For safety and comfort, the crotch buckle has two positions. Use the position that is closest to, but not under your child. The crotch buckle has two adjustable positions. Rotate seat to side position for easier access. Unbuckle the harness by pressing the release button on the Chest Clip.
  • Page 28 Crotch Buckle Adjustment: (cont.) Undo the snap buttons and pull up on the seat fabric around the Harness Adjustment Strap. Locate the crotch buckle adjustment slots in the seat shell and squeeze/pinch the sides of the strap together. Twist and slide the crotch buckle strap forward or backwards into the desired slot to best fit your child.

  • Page 30: Adjusting Recline

    Adjusting Recline: ALWAYS adjust recline when installing Rear-Facing. Make sure the vehicle is on a flat and LEVEL surface. NEVER adjust the recline when vehicle is on an incline. Pull the Rotate Lever and turn the child restraint seat to either Rear-Facing or Forward-Facing based on your installation choice.

  • Page 32: Removing Infant Insert

    The Infant Insert can be used as necessary, to provide a snug fit for small babies. Removing Infant Insert: Pull the Rotate Lever and turn the child restraint seat to the side position for easier access. Unbuckle the harness by pressing the release button on the Chest Clip.

  • Page 34: Rf - Install Using Latch

    Install Using LATCH: WARNING! Do not install by this method for a child weighing more than 35 lb. (16 kg). WARNING! DO NOT use Tether when installing Rear-Facing. INSTALL USING ONLY ONE METHOD. NEVER install using BOTH Seat Belt and LATCH. BEFORE INSTALLING refer to Adjusting Recline on PG 30 and properly store Tether see PG 74.
  • Page 36 Install Using LATCH: (cont.) Open the Lock-Off bar on the child restraint base. Make sure the LATCH Straps are routed inside the Lock-Off area and UNDERNEATH both Belt Guides on the child restraint base. Attach BOTH LATCH Connectors to the correct lower anchor points in your vehicle.

  • Page 38: Rear-Facing Securing Child In Seat

    Install Using LATCH: (cont.) Once the LATCH Straps are tight, close the Lock-Off bar. Keep your hands clear of the Lock-Off area while closing it. After installing your child restraint continue on to Rear-Facing Securing Child in Seat on PG. 48. Check Install! Lock-Off Bar is securely locked.
  • Page 40 Install Using Lap/Shoulder Belt: WARNING! DO NOT use Tether when installing Rear-Facing. INSTALL USING ONLY ONE METHOD. NEVER install using BOTH Seat Belt and LATCH. Only install in a forward facing vehicle seat. BEFORE INSTALLING refer to Adjusting Recline on PG 30 and properly store Tether see PG 74.
  • Page 42 Install Using Lap/Shoulder Belt: (cont.) Once the Lap/Shoulder Belt is tight, close the Lock-Off bar. Keep your hands clear of the Lock-Off area while closing it. After installing your child restraint continue on to Rear-Facing Securing Child in Seat on PG. 48. Check Install! Lock-Off Bar is securely locked.
  • Page 44 Install Using Lap Belt ONLY: WARNING! DO NOT use Tether when installing Rear-Facing. INSTALL USING ONLY ONE METHOD - NEVER install using BOTH Seat Belt and LATCH. ONLY install in a forward facing vehicle seat. BEFORE INSTALLING the Tether must be properly stored see PG 74 and the recline MUST be adjusted to recline POSITION 4 see PG 30.
  • Page 46 Install Using Lap Belt ONLY: (cont.) Once the Lap Belt is tight, close the Lock-Off bar. Keep your hands clear of the Lock-Off area while closing it. After installing your child restraint continue on to Rear-Facing Securing Child in Seat on PG.
  • Page 48 Rear-Facing Securing Child: Pull the Rotate Lever and turn the child restraint seat to the side position for easier access. Locate the harness adjustment button (1) and press it down while pulling the shoulder harnesses (2) outward to loosen. Unbuckle the harness by pressing the release button on the Chest Clip.
  • Page 50 Rear-Facing Securing Child: (cont.) The top of child’s head MUST be at least 1 inch below top of child restraint and harness straps must be at or just BELOW child’s shoulders to avoid injury. If NOT please refer to Headrest Height Adjustment on PG 24.
  • Page 51 1 inch (2.5 cm)
  • Page 52 Rear-Facing Securing Child: (cont.) 10 - Position the Chest Clip at child’s ARMPIT LEVEL and make sure the Harness Pads are on TOP of the child’s shoulders. WARNING! Harness Pads MUST be on TOP of the child’s shoulders for children weighing 4 - 22 lb. (1.8 - 10 kg). 11 - Pull the Rotate Lever and turn the child restraint seat to the REAR-FACING position.
  • Page 53 WARNING! ALWAYS make sure the turn lock indicator is green, even when the child is not in the seat.
  • Page 54 Install Using LATCH: WARNING! Do not install by this method for a child weighing more than 35 lbs (16 kg). INSTALL USING ONLY ONE METHOD. NEVER install using BOTH Seat Belt and LATCH. BEFORE INSTALLING refer to Adjusting Recline on PG 30. Rotate the child restraint seat to the Rear-Facing position.
  • Page 56 Install Using LATCH: (cont.) Locate the Top Tether strap stored on the back of the child restraint base and unhook it from its storage. Loosen the Tether strap fully by pulling up on the release tab (1). Then Place the child restraint on the vehicle seat and lay the Tether strap across the back of the vehicle seat.

  • Page 58: Forward-Facing Securing Child In Seat

    Install Using LATCH: (cont.) Once the LATCH Straps are tight, close the Lock-Off bar. Keep your hands clear of the Lock-Off area while closing it. 10 - Attach the Tether strap to your vehicles tether attachment point. Pull the loose end of the webbing on the top Tether strap to tighten it.
  • Page 60 Install Using Lap/Shoulder Belt: INSTALL USING ONLY ONE METHOD. NEVER install using BOTH Seat Belt and LATCH. Only install in a forward facing vehicle seat. BEFORE INSTALLING refer to Adjusting Recline on PG 30. Rotate the child restraint seat to the Rear-Facing position. Open the Lock-Off bar on the child restraint base.
  • Page 62 Install Using Lap/Shoulder Belt: (cont.) Once the Lap/Shoulder Belt is tight, close the Lock-Off bar. Keep your hands clear of the Lock-Off area while closing it. Attach the Tether strap to your vehicles tether attachment point. Pull the loose end of the webbing on the top Tether strap to tighten it.
  • Page 64 Install Using Lap Belt ONLY: INSTALL USING ONLY ONE METHOD - NEVER install using BOTH Seat Belt and LATCH. ONLY install in a forward-facing vehicle seat. BEFORE INSTALLING refer to Adjusting Recline on PG 30. WARNING! When installing rear-facing with Lap Belt Only ALWAYS recline the seat to POSITION 4.
  • Page 66 Install Using Lap Belt ONLY: (cont.) Tighten the Lap Belt. Push the child restraint down firmly while tightening to remove any slack in the strap. Once the Lap Belt is tight, close the Lock-Off bar. Keep your hands clear of the Lock-Off area while closing it. Attach the Tether strap to your vehicles tether attachment point.
  • Page 68 Forward-Facing Securing Child: Pull the Rotate Lever and turn the child restraint seat to the side position for easier access. Locate the harness adjustment button (1) and press it down while pulling the shoulder harnesses (2) outward to loosen. Unbuckle the harness by pressing the release button on the Chest Clip.
  • Page 70 Forward-Facing Securing Child: (cont.) Insert Buckle Tongues into the Buckle. Listen for click. Pull on Buckle to make sure it is properly attached. Snap the Chest Clip together and temporarily slide towards Buckle for tightening the Harness Straps. Pull on the Adjustment Strap to tighten the Harness. Slide any excess strap length from the child’s waist up through the buckle towards the shoulders, and repeat this step until the harness is secure.
  • Page 72 Forward-Facing Securing Child: (cont.) Harness straps must be at or just ABOVE child’s shoulders. If NOT please refer to Headrest Height Adjustment on PG 24. 10 - Position the Chest Clip at child’s armpit level. 11 - Pull the Rotate Lever and turn the child restraint seat to the FORWARD-FACING position.
  • Page 73 WARNING! ALWAYS make sure the turn lock indicator is green, even when the child is not in the seat.
  • Page 74 Removing LATCH and Tether: Open the Lock-Off bar. Press the red buttons on both LATCH Connectors and pull to remove from the lower anchor points in your vehicle. Lift the Tether release tab and pull to release it. Then un-clip the Tether from your vehicle.

  • Page 76: Removing Softgoods

    Removing Softgoods: WARNING! NEVER use this child restraint without the softgoods in place. Pull the Rotate Lever and turn the child restraint seat to the side position. Unbuckle the harness by pressing the release button on the Chest Clip. Press button and remove the Buckle Tongues from Harness Buckle.
  • Page 78 Removing Softgoods: (cont.) On the BACK of the headrest, un-hook BOTH elastic straps of the headrest cover from the headrest. Then pull the headrest cover forward and undo the BOTH snaps on the bottom of the headrest cover and remove the headrest cover. Undo the two buttons inside seat shell, pull backrest fabric forward, slide buckle through fabric slot.
  • Page 80 Removing Softgoods: (cont.) 11 - Lower the headrest to the LOWEST position. 12 - Undo the clip on the fabric from the top of the seat shell. 13 - Pull the softgoods up around the seat shell and completely remove. To re-assemble, follow these steps in reverse order.

  • Page 82: Cup Holders

    Cup Holders: DO NOT use the cup holder for hot beverages. IMPORTANT: The maximum recommended weight in the cup holder is 1 lb. (0.5 kg).

  • Page 84: Care And Maintenance

    Care and Maintenance: Washing: Refer to the care label attached to the fabrics for washing and drying instructions. DO NOT attempt to remove the foam or tape under the seat pad. Cleaning: Use only mild detergent, water, and a soft cloth to clean the infant carrier shell, handle and harness straps.
  • Page 85 Care and Maintenance: Storage: When not in use for a long period, remove the child restraint from the vehicle seat. Store the carrier in a cool, dry place that your child does not have access to. Normal Wear and Tear: It is normal for the fabric to fade from sunlight and show wear and tear over time even when used normally.
  • Page 86 IM-001442E...

Table of Contents