Chapter 4 Electrical Installation; Overview; Safety Messages; Install Lcd Display - Emerson Rosemount 3051CF Series Manual
Pressure transmitter with 4-20 ma hart protocol
Hide thumbs
Also See for Rosemount 3051CF Series:
- Reference manual (146 pages) ,
- Quick start manual (56 pages) ,
- Manual (122 pages)
Table of Contents
Advertisement
Manual
00809-0100-4007
4
Electrical installation
4.1
Overview
The information in this section covers installation considerations for the Rosemount 3051
Transmitter.
A Quick Start Guide is shipped with every transmitter to describe pipe-fitting, wiring
procedures, and basic configuration for initial installation.
Related information
Disassembling the transmitter
Reassemble the transmitter
4.2
Safety messages
Procedures and instructions in this section may require special precautions to ensure the
safety of the personnel performing the operations.
See
Safety
4.3
Install LCD display
Emerson ships transmitters ordered with the LCD display, graphical LCD display, or Local
Operator Interface (LOI) options with the display installed.
To install the display on an existing Rosemount 3051 Transmitter:
Prerequisites
Small instrument screwdriver
Procedure
Carefully align the desired display connectors with the electronics board connector.
If the connectors don't align, the display and electronics board are not compatible.
www.emerson.com
messages.
Electrical installation
July 2024
71
Advertisement
Table of Contents
Need help?
Do you have a question about the Rosemount 3051CF Series and is the answer not in the manual?
Questions and answers