For Macintosh Users; Macintosh Software Installation - Yamaha M7CL Installation Manual

Minimum System Requirements
Make sure that the computer you are using satisfies the recommended system requirements for each editor
software. For details about the system requirements, refer to the owner's manual for each editor.
n
The system requirements may differ slightly depending on the particular operating system.

Macintosh Software Installation

To use the Studio Manager, you'll need to install the following software programs. Follow the appropriate
instructions below corresponding to the software you're using.
• USB-MIDI driver (when connecting via USB) or mLAN Tools (when connecting via mLAN)
• Studio Manager
• Editor software for your particular hardware
Driver Installation
Depending on the cable connection you are using, install the USB-MIDI driver or mLAN Tools.
n
You can also use MIDI cables to connect your Yamaha hardware to the computer. For details, refer to the owner's manual of your
particular MIDI interface.
• USB-MIDI Driver
To operate your Yamaha hardware from your computer via USB, you'll need to install the USB-MIDI driver software.
The USB-MIDI driver is software that transfers MIDI data back and forth between your sequencer software and the
hardware via a USB cable.
Sequencer
Driver
Computer
You can download the latest version of the USB-MIDI driver at the following website. For specific installation instructions,
refer to the installation guide included in the downloaded file.
http://www.global.yamaha.com/download/usb_midi/
Studio Manager Version 2 Installation Guide

For Macintosh Users

USB cable
Yamaha hardware with a USB interface
MUSIC PRODUCTION SYNTHESIZER
7