Network Settings - Yamaha CL3 Installation Manual

When you connect the computer to the CL through a dedicated
network
• Settings of the CL
You can use the following initial settings.
IP address
Gateway address
Subnet mask
• Settings of the computer
We recommend that you make the following settings.
IP address
Subnet mask
Default gateway (Router)
When you connect the computer to the CL in the existing network
Make the network settings of the CL and your computer in accordance with your LAN. Please contact your network
administrator for further details. For specific instructions and caution for connecting the CL to LAN, please refer to
the following web site:
http://www.yamahaproaudio.com/
• Settings of the CL
IP address
Gateway address
Subnet mask
CL Editor Installation Guide

Network Settings

192.168.0.128
192.168.0.1
255.255.255.0
192.168.0.100
255.255.255.0
192.168.0.1
Set the IP address so that it does not conflict with the IP address of any other device on
the network.
Set the IP address of the gateway when the gateway exists. Set the vacant address
when the gateway does not exist. The address should be set in the same subnet as IP
address within LAN in which the subnet is set.
Set the subnet mask of the subnet connected to the CL.
6