Prepare To Install; Update The Software; Connection Settings - Yamaha mLAN Installation Manual

3 Upgrade the firmware of the
mLAN device
When using the 01X, i88X or mLAN16E along with the
computer via the mLAN connection, it may be necessary to
upgrade the firmware of these devices. If so, perform the
upgrade operation. For details, see

4 Prepare to install

Make the preparations that are required for the installation.
Refer to page 6 for details.

5 Update the software

Uninstall the old version of the software and install the new
version of the software as follows.
5-1
After the downloaded compressed file is
properly extracted, double-click the
"setup.exe" file.
The maintenance window appears.
NOTE
• When using Windows Vista, click [Continue] if the "User
Account Control" window appears. After that, the maintenance
screen will appear.
5-2 Select the radio button to the left of
"Update," then click [Next].
5-3 Follow the instructions to uninstall the old
version of the software, then install the new
version of the software.
For details, refer to "Uninstalling the software" (see
page 24) and "Installing the software" (see
The method for uninstalling n Driver or AI Driver is the
same as in the procedure "Uninstalling the software."
page 23.
page 5).
6 Recalling the mLAN

connection settings

You can recall the mLAN connection settings by using
mLAN Auto Connector or opening the file (saved in step 2)
from the File menu of mLAN Graphic Patchbay.
NOTE
• When using the mLAN device which is supported by Connection
Manager, the mLAN connection settings will be recalled automat-
ically by Connection Manager.
mLAN Driver/mLAN Tools Installation Guide
26