Using An External Effector - Pioneer DJM 600 - DJ Mixer 4 Channel Operating Instructions Manual

Precautions:
÷ If the channel has been changed with the effect/sampler
channel selector switch when delay, echo (pages 16 and
17), reverb and similar effects have been turned on, all of
the reverberation of the prior channel's effects will be
output.
÷ Only operate the effect/sampler selector switch when
effects are off (when the effect/sampler ON/OFF switch is
lit orange). Operating it with effects on could generate
noise.

Using an External Effector

The following example is for applying external effects to
music on CH-3.
1 Set the effect/sampler selector switch to SEND/
RETURN.
2 Set the effect/sampler channel selector switch
to 3.
÷ LED "3" on the effect parameter/BPM display will light.
3 Set external effector parameters, etc.
÷ When headphone cue's EFFECTS/SAMPLER is
pressed, effect sound can be confirmed via headphone
output.
4 Adjust the return level.
÷ The return level from the external effector can be
adjusted with the effect/sampler parameter 2 knob.
* Effect/sampler parameter 1 knob (TIME) will not
function.
5 Turn on the effect/sampler ON/OFF switch.
÷ The effect/sampler ON/OFF switch will blink orange,
and the external effect will be applied to music on CH-3.
÷ Pressing the switch once more will turn the effect off.
USING THE EFFECT/SAMPLER FUNCTIONS
BPM display
1
AUTO BPM COUNTER
70-139
BPM
Effect parameter/
1 2
BPM display
PARAMETER1
1 / 2 3 / 4
1 2
÷ Display when CH-3 has been pitch-shifted by 90%.
BPM display
1
AUTO BPM COUNTER
70-139
BPM
Effect parameter/
1 2
BPM display
PARAMETER1
1 / 2 3 / 4
1 2
÷ Display when an external effect has been applied to CH-3.
2 3 4
91-180
BPM
MASTER
3 4 MIC
LED
%
Counter
1 / 1 2 / 1 4 / 1
Beat display
4 8 16
BEAT
Effect beat selector
switch
2 3 4
91-180
BPM
MASTER
3 4 MIC
LED
1 / 1 2 / 1 4 / 1
4 8 16
BEAT
<DRB1251>
19