Advertisement
4. Wi-Fi configuration
4.1 Go to "Basic Setup" – "WLAN", user can configure the 2.4G and 5G Wi-Fi separately or same SSID
if enabled Smart Connect. Then set the SSID name and Authentication.
4.2 It is recommend to set "Authentication" as WPA-PSK/WPA2-PSK, and the "Encryption" as
TKIP+AES
PPPoE Configuration
Enter Username and Password
from your ISP
Smart Connect
Advertisement
Need help?
Do you have a question about the OnBox W1800PRO Wi-Fi 6 and is the answer not in the manual?
Questions and answers