Table of Contents
Advertisement
Mobile APP Connection
Make sure the device has been installed,
connect the power supply, open the APP
(GLaser). Setting up the board connection
following the instructions. The device WiFi is
"G_Laser", and the password is "12345678".
Tips: When using
the Mobile APP to
connect, the USB
cable should be
disconnected to
the PC.
PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE
PC APP Connection
Make sure the device has been installed,
connect the power supply, use the USB
cable to connect to the PC, and open the
application GLaser.exe.
Advertisement
Table of Contents
Need help?
Do you have a question about the G2 PRO and is the answer not in the manual?
Questions and answers
G2 is not being recognized
The G-WEIKE G2 PRO may not be recognized because the manual lacks clear guidance on how to navigate the system window, and users are required to learn usage through external videos. Additionally, proper installation steps such as connecting the power supply and using the correct mobile or PC app must be followed.
This answer is automatically generated