Subscribe to Our Youtube Channel
Related Manuals for G-WEIKE G2
Summary of Contents for G-WEIKE G2
- Page 1 FIBER LASER MANUAL ＊ Notes: Adjust the height of the stand to ensure the focal length is 211mm/261mm (211mm for the 110-field lens and 261mm for the 150-field lens). Each machine may have a slight deviation. Please refer to the red dot focusing measurement.
-
Page 2: After-Sales Service
PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE Mobile/PC APPs & Manual Download Download the Mobile/PC APPs and G2 manual via: https://www.gweikecloud.com/pages/gweikecloud-documentation. www.gweikecloud.com/pages/gweikecloud-documentation After-sales service 24/7 online support G2 Customer Support: +86 15850677817 Whatsapp: +86 15850677817... - Page 3 PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE Mobile APP Connection PC APP Connection Make sure the device has been installed, Make sure the device has been installed, connect the power supply, open the APP connect the power supply, use the USB (GLaser).
-
Page 4: Table Of Contents
CATALOGUE 01. List Of Standard/optional Product Accessories 02. Buttons And Indicators Instructions 03. Installation Instructions 04. Daily Cleaning & Maintenance 05. Product Specification 06. Usage Safety Guide 07. Precautions 08. Disclaimer... -
Page 5: List Of Standard/Optional Product Accessories
PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE /List Of Standard/Optional Product Accessories List Of Standard Product Accessories Main Engine Lifting Stand Locating Plate x 2 Tool Box Laser Source Signal Wire L-shaped Connecting Workbench USB Cable USB Flash Disk Plate Bracket x 2 Focal Length Power Cord and Riser x 2 Screw x 2... -
Page 6: Buttons And Indicators Instructions
PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE /Buttons And Indicators Instructions Laser source signal Laser source signal interface Laser source handle Emergency stop button interface Laser signal interface Indicator light Support bracket Laser signal interface Handle Computer(PCsoftware) Lifting stand power interface connection interface DC power interface Main engine... -
Page 7: Installation Instructions
PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE /Installation Instructions Install the lifting stand Install and secure the main engine... - Page 8 PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE Tips Lens Cover: Take It Off When Working Laser Source Power And Laser Head Power: laser source power on, laser head power on (pulled out) Signal Wire: Plug In As Shown...
- Page 9 PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE Focalizing Focal Length Ruler Dual Red Light Positioning Put the zero section of the ruler on the Adjust the knob on the upper end of the lifting surface of the workpiece to be engraved, stand so that the two red lights converge into adjust the knob on the upper end of the one point.
- Page 10 PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE Engraving Bevel Engraving The fixing nut and angle adjusting nut can be loosened to adjust the main engine to a suitable angle. Focus to the surface of the object 211mm/261mm...
- Page 11 PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE Engraving Handheld Engraving Hold the handle of the main engine directly, and aim at the surface of the object to be engraved for engraving. Handle position Handle position Focal length 211mm/261mm Protection cover height=Focal length 211mm/261mm...
- Page 12 PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE Installation instructions for risers The G2 comes with 2 risers, which allows it to work on objects with higher heights, and you can adjust the height according to your processing needs. 1*riser Installation Fix the head and the riser and Installation Done tighten them with the screws.
- Page 13 PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE Installation instructions for risers The G2 comes with 2 risers, which allows it to work on objects with higher heights, and you can adjust the height according to your processing needs. 2*riser Installation Fix the head and the riser and tighten them with the screws.
-
Page 14: Daily Cleaning & Maintenance
PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE /Daily Cleaning & Maintenance Clean It With Cotton Swab + Alcohol Wipe ( Note: The device can only be used after the alcohol has evaporated ) Cover The Lens With The Lid To Avoid Dust When Not Using... -
Page 15: Product Specification
PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE /Product Specification TECHNICAL PARAMETERS Size Laser head: 222.4*82.4*132.5mm Bracket:250*200*322mm Weight 12kg Laser Wave Length 1064nm Output power Engraving area 110mm*110mm/150mm*150mm Exterior Aluminum alloy anodizing Document transfer USB cable and WiFi wireless transmission Supported Document Formats PLT/SVG/DXF/AI/BMP/JPG/JPEG/PNG and other common formats Connection App-WiFi connection;... -
Page 16: Usage Safety Guide
PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE /Usage Safety Guide Before installing the fiber laser, please check that the equipment is in good condition and the laser lens is clean and free of contamination. Installation specification: Before starting to operate the fiber laser, please refer to the instruction manual to fix the laser head (use accessories or supports with fixing functions such as safety shield, electric lift stand and third axis to avoid breaking the support- ing object due to unstable placement) Please be sure to supply power to the device according to the power and power type (24V 11A adapter) indicated in the instruc-... -
Page 17: Precautions
PORTABLE BUT INDUSTRIAL LASER MARKING MACHINE /Precautions Please read the [Safety Guide] in detail, and remember all the contents to standardize the operation. This product does not contain any user-replaceable components. No matter what the scene is, please do not attempt to disassemble the marking machine or troubleshoot the problem. - Page 18 Gweike Technology Co., Ltd. Address:13A，Building D, Big Data Industrial Base, Xinluo Street, Gaoxin District, Jinan, Shandong, China Email: info@gweikecloud.com Tel: +86-18769772322...
Need help?
Do you have a question about the G2 and is the answer not in the manual?
Questions and answers
I need help the USB drive that came with order 4500M doesn't work I have been trying for about 3 weeks to get it replaced but no one there helps so I think your customer service is about 0%