Related Manuals for fanttik D2 PLUS
Summary of Contents for fanttik D2 PLUS
- Page 1 D2 PLUS model no. : PM011S Laser Level User Manual Please read these instructions before operating the product Bien lire ces instructions avant d’utiliser le produit Lea estas instrucciones antes de utilizar el producto...
- Page 2 Index English 01~14 Warranty...
- Page 3 Figure B Figure D Figure A Locked Unlock Figure E Figure C Figure F...
-
Page 4: Table Of Contents
Contents 1.Safety Warning 2.Package Content 3.Product Overview 4.Operation and Function 5.Specifications 6.Troubleshooting - 01 -... -
Page 5: Safety Warning
1. Safety Warning Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. - Page 6 SAVE THESE INSTRUCTIONS WARNING: Laser Radiation Exposure. Do not disassemble or modify the laser level. There are no user serviceable parts inside. Serious eye injury could result. WARNING: Hazardous Radiation. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
- Page 7 • Do not operate the laser in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. • Store idle laser out of reach of children and other untrained persons. Lasers are dangerous in the hands of untrained users.
- Page 8 Do not remove or deface warning labels. If labels are removed user or others may • inadvertently expose themselves to radiation. Position the laser securely on a level surface. Damage to the laser or serious injury • could result if the laser falls WARNING:Read and understand all instructions.
- Page 9 Personal Safety • Stay alert, watch what you are doing and use common sense when operating a laser tool. Do not use tool while tired or under the influence of drugs, alcohol, or medica- tion. A moment of inattention while operating power tools may result in serious personal injury.
- Page 10 Service • Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. • When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual.
-
Page 11: Package Content
2.Package Content Target Plate x 1 D2 plus Laser level x 1 L Bracket x 1 Manual Drawstring Bag x 1 USB cablex 1 Use Manual x 1 - 08 -... -
Page 12: Product Overview
3.Product Overview 1 - Vertical Laser outlet 5 - Tripod thread fitting (1/4”-20) 2 - Horizontal Laser outlet 6 – Battery indicator 3 - Pendulum Lock 7 – Power Switch 4 - Charging Port 8 – Pulse Indicator WARNING: Never modify the tool or any part of it. Damage to the laser or personal injury could result. -
Page 13: Operation And Function
4.Operation and Function Two working mode- Manual and Self-level(See Figure B ) Pendulum lock ③ has two position – Locked/Unlock • Locked position: The laser beam is fixed and flash every 5s, rotate the unit to get any angle beam you expected.(see figure D) •... - Page 14 by pushing it back. • Swith laser line When laser is on and laser line is fixed or on levelling, short press the power switch⑦ then get which one you wanted. • Pulse Mode(See Figure F) Active pulse function by press Power Switch ⑦ 2s when Pendulum lock ③ at unlock position.
-
Page 15: Specifications
5.Specifications Light Source Laser diodes Laser Wavelength 510-530nm Laser Power ≤ 1mw (each beam) CLASS 2 100ft (30m) @100lux Working Range 200ft(60m) with detector Accuracy (Level): ± 3/32in per 30’(±2mm per 10m) Leveling/Compensation Range ±3 ° Power Source 3.7V 2600mAh Li-ion Working time per full charge Operating Temperature... -
Page 16: Troubleshooting
The Laser Beams Will Not Stop Moving The laser is a precision instrument. Therefore, if it is not positioned on a stable (and motionless) surface, the laser will continue to try to find level. If the beam will not stop moving, try placing the laser on a more stable surface. - Page 17 Within 24 months of purchase, we will provide timely and effective online after-sales service. We will repair or replace any defective product (due to manufacturing fault). How to Return Your Fanttik Product Contact support@fanttik.com with your order number. If your purchase was fulfilled by Amazon, please use Amazon’s 30-day return service.
- Page 18 METASEE LLC 5205 Broadway #634 Pearland Texas 77581 www.fanttik.com support@fanttik.com...
Need help?
Do you have a question about the D2 PLUS and is the answer not in the manual?
Questions and answers