Advertisement
Advertisement
Table of Contents
Related Manuals for fanttik D2
Summary of Contents for fanttik D2
- Page 1 Index English 01~14 Warranty...
- Page 2 Figure A Figure C Unlock Locked Figure B...
-
Page 3: Table Of Contents
Contents 1.Safety Warning 2.Package Content 3.Product Overview 4.Operation and Function 5.Specifications 6.Troubleshooting - 01 -... -
Page 4: Safety Warning
1. Safety Warning Definitions: Safety Guidelines The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. - Page 5 SAVE THESE INSTRUCTIONS WARNING:Laser Radiation Exposure. Do not disassemble or modify the laser level. There are no user serviceable parts inside. Serious eye injury could result. WARNING: Hazardous Radiation. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. The label on your tool may include the following symbols.
- Page 6 • Do not operate the laser in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. • Store idle laser out of reach of children and other untrained persons. Lasers are dangerous in the hands of untrained users.
- Page 7 • Do not remove or deface warning labels. If labels are removed user or others may inadvertently expose themselves to radiation. • Position the laser securely on a level surface. Damage to the laser or serious injury could result if the laser falls WARNING:Read and understand all instructions.
- Page 8 Personal Safety • Stay alert, watch what you are doing and use common sense when operating a laser tool. Do not use tool while tired or under the influence of drugs, alcohol, or medication. A moment of inatten- tion while operating power tools may result in serious personal injury. •...
- Page 9 Service Tool service must be performed only by qualified repair personnel. Service or maintenance • performed by unqualified personnel could result in a risk of injury. When servicing a tool, use only identical replacement parts. Follow instructions in the Mainte- •...
-
Page 10: Package Content
2.Package Content L Bracketx 1 USB cablex 1 Manual D2 Laser level x 1 Drawstring Bag x 1 Use Manual x 1 - 08 -... -
Page 11: Product Overview
3.Product Overview 6 7 8 ①- Laser Windows ⑤- Tripod thread fitting (1/4”-20) ②- Pendulum Lock switch ⑥- Battery Capacity Indicator ③- Port Cap ⑦- Power button ④- Charging Port ⑧- Pulse Indicator WARNING: Never modify the tool or any part of it. Damage to the laser or personal injury could result. - 09 -... -
Page 12: Operation And Function
4.Operation and Function Two working mode- Manual and Self-level (See Figure A ) Pendulum lock Switch ② has two position – Locked/Unlock Locked position: The laser beam is fixed and flash every 4s, rotate the unit to get any angle beam you expected.(see figure C) Unlock position: The lasers are designed to self-level. - Page 13 way one: turn on the laser by pressing Power Button ⑦ 0.5s, and turn off by 2s pressing; Way two: turn on by Sliding the Pendulum Lock switch ② to the Unlocked position, Turn off by sliding the switch back Pulse Mode Active the pulse mode by short press Power Button ⑦...
-
Page 14: Specifications
5.Specifications Light Source Laser diodes Laser Wavelength 510-530nm Laser Power <1 mw (each beam), CLASS 2 100' (30m)@100lux Working Range 164' (50m) with detector Accuracy (Level): ± 1/8” per 30’ (±3mm per 10m) Leveling/Compensation Range ±4 ° Power Source 3.7V Li Ion Rechargeable Battery Operating Temperature 20°F to 115°F (-10°C to 45°C) -
Page 15: Troubleshooting
6.Troubleshooting The Laser Does Not Turn On • Make sure the unit have power • If the laser unit is heated above 120˚F (50˚C), the unit will not turn on. If the laser has been stored in extremely hot temperatures, allow it to cool. The laser level will not be damaged by pressing the on/off button before cooling to its proper operating temperature. - Page 16 The Laser Beams Will Not Stop Moving The laser is a precision instrument. Therefore, if it is not positioned on a stable (and motionless) surface, the laser will continue to try to find level. If the beam will not stop moving, try placing the laser on a more stable surface.
- Page 17 Within 24 months of purchase, we will provide timely and effective online after-sales service. We will repair or replace any defective product (due to manufacturing fault). How to Return Your Fanttik Product Contact support@fanttik.com with your order number. If your purchase was fulfilled by Amazon, please use Amazon’s 30-day return service.
- Page 18 METASEE LLC 5205 Broadway #634 Pearland Texas 77581...
Need help?
Do you have a question about the D2 and is the answer not in the manual?
Questions and answers