Checking And Replacing Fuses - Toyota CAMRY HYBRID 2025 Manual

Table of Contents

Advertisement

416
6-3. Do-it-yourself maintenance
WARNING
If you accidentally swallow a
battery or put a battery into a
part of your body, get emer-
gency medical attention imme-
diately.
To prevent battery explosion
or leakage of flammable liq-
uid or gas
Replace the battery with a new
battery of the same type. If a
wrong type of battery is used, it
may explode.
Do not expose batteries to
extremely low pressure due to
high altitude or extremely high
temperatures.
Do not burn, break or cut a bat-
tery.
NOTICE
When replacing the battery
Use a flathead screwdriver of
appropriate size. Applying exces-
sive force may deform or damage
the cover.
For normal operation after
replacing the battery
Observe the following precautions
to prevent accidents:
Always work with dry hands.
Moisture may cause the battery
to rust.
Do not touch or move any other
component inside the remote
control.
Do not bend either of the battery
terminals.
Checking and replac-
ing fuses
If any of the electrical com-
ponents do not operate, a
fuse may have blown. If this
happens, check and replace
the fuses as necessary.
Checking and replacing
fuses
1
Turn the power switch off.
2
Open the fuse box cover.
Engine compartment
Push the tabs in and lift the lid off.
Under the driver's side instru-
ment panel
Remove the lid.
Make sure to push the claw when
removing/installing the lid.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CAMRY HYBRID 2025 and is the answer not in the manual?

Questions and answers

Sarah
February 28, 2025

On screen for the 2025 Toyota Camry XLE, how do I determine the current tire pressure?

1 comments:
Mr. Anderson
February 28, 2025

To check the current tire pressure on the 2025 Toyota Camry XLE screen, follow these steps:

1. Start the hybrid system.
2. Use the meter control switches to navigate the multi-information display.
3. Select “Vehicle Settings” and press and hold the button.
4. Select “TPWS setting” and press the button.
5. The tire pressure detected by the system will be displayed on the multi-information display.

It may take a few minutes for the tire pressure to update after turning on the power switch or adjusting the tire pressure.

This answer is automatically generated

Anne Skandera
March 13, 2025

how to set the clock

1 comments:
Mr. Anderson
March 13, 2025

The clock in a 2025 Toyota Camry Hybrid automatically adjusts the time using GPS time information (GPS clock). For details on setting the clock, refer to the “MULTIMEDIA OWNER’S MANUAL.”

This answer is automatically generated

Louisa Lopez-Martinez
March 17, 2025

Does the 2025 hybrid camery have an automatic shut off if left idling

1 comments:
Mr. Anderson
March 17, 2025

Yes, the 2025 Toyota Camry Hybrid has an automatic hybrid system shut-off feature when left idling. The timer for this feature resets if the brake pedal is depressed or if the shift lever is moved out of the "P" position. Additionally, the feature is disabled if the vehicle is parked and locked but re-enabled when the driver's door is opened.

This answer is automatically generated

Manzoor Ahmad Shah
April 5, 2025

On what page of manual shall I find that my Toyota Camry Hybrid LE 2025 has rolling codes fob?

Table of Contents

Save PDF