Clutch Housing Case - Kubota M8560 Workshop Manual

M8560, M9960, WSM

(3) Clutch Housing Case

Separating Clutch Housing Case from Engine
1. Remove the clutch housing mounting screws and nuts.
2. Separate the clutch housing case.
(When reassembling)
• Apply molybdenum disulphide (Three Bond 1901 or equivalent)
to spline of input shaft.
• Apply liquid gasket (Three Bond 1211, 1141 or equivalent) to
the seam of engine and clutch housing.
Clutch housing mounting
Tightening torque
screw and nut (M14, 7T)
Separating Clutch Housing Case from Transmission Case
1. Remove the transmission case mounting screws and nuts.
2. Separate the clutch housing case from transmission case.
(When reassembling)
• Apply liquid gaskets (Three Bond TB1206C or equivalent) to
joint face.
Transmission case
Tightening torque
mounting screw and nut
2-S56
TRANSMISSION
124 to 147 N·m
12.6 to 15.0 kgf·m
91.2 to 108 lbf·ft
9Y1210686TRS0059US0
124 to 147 N·m
12.6 to 15.0 kgf·m
91.2 to 108 lbf·ft
9Y1210686TRS0060US0
KiSC issued 08, 2012 A