Silonn SLIM21B - Ice Maker Manual

PRODUCT INTRODUCTION

1. Large Viewing Window
2. Ice Full Sensor
3. Ice Shovel
4. Maximum Water Fill Line
5. Air Exhaust Fan
6. Control Panel
7. Handle
8. Drain Plug
9. Ice Scoop Holder
10. Ice Basket
11. Ice Scoop

CONTROL PANEL INTRODUCTION

USING YOUR ICE MAKER

BEFORE FIRST USE

1. Stand upright for 24hrs.
   
   Check for accessories.
   
   Missing parts? Contact us.
   
2. Clean the ice maker thoroughly before first use.
   
   Discard first 4 cycles of ice.
   
   Use in locations 50ºF ~ 90ºF.
   
   Perfect ice shape.
   

3. Installing The Handle
   Position the handle over the insert hole.
   
   Fit the handle into the insert hole.
   
   Lift back to lock into place.
   

4. What Not To Do!
   Unstable base.
   
   No other liquids (Drinking water only).
   
   Do not use in high or low temps.
   

HOW TO USE YOUR ICE MAKER

1. Open cover and remove basket.
   
2. Pour water, do not exceed the "MAX" water mark.
   
3. Press the ON/OFF button.
   
4. Press SELECT button to choose ice cube size.
   
5. Wait 6min-13min.
   

Ice full and ready when "ICE FULL" indicator is on.

When "ADD WATER" indicator is red, add water and press ON/OFF button.

Take ice cubes out in time to avoid melting.

CLEANING AND MAINTENANCE

To keep your ice tasting fresh and the unit looking great, we recommend cleaning the unit once per week.

SELF-CLEANING (30-MIN PROCESS)

1. Remove the basket and add water to the "MAX" water level.
   
2. Press and hold ON/OFF/CLEAN button for 5 sec to start self-cleaning.
   
3. Drain Plug
   
4. Clean exterior with cloth using mild dishwashing soap.
   

MANUAL CLEANING

Turn off the unit and disconnect from power outlet before cleaning.

1. Remove the basket.
   
2. Clean using a soft cloth with warm water and vinegar. Clean the water filter, ice shovel and the evaporator to avoid dirt buildup.
   
3. Drain water reservoir.
   
4. Clean exterior with cloth and mild dishwashing soap.
   

DO's & DON' Ts while cleaning and maintaining

• Do not use organic solvent, boiled water, detergent, strong acid and strong alkali etc. for cleaning.
• When the unit is not to be used for a long duration, drain the water completely & dry the interior.
• Store in a well-ventilated area.

PRODUCT SPECIFICATIONS

TROUBLESHOOTING

IMPORTANT SAFETY INFORMATION

To reduce the risk of injury or property damage, please follow these safety precautions.

• Voltage power from outlet must match specifications on appliance nameplate.
• This appliance must be grounded.
• Using an extension cord may cause overheating and increase the risk of fire.
  If an extension cord MUST be used:

1. Only use an extension cord with grounding plug.
2. The marked rating of an extension cord must be equal to or greater than the rating of this appliance.

• Do not operate if any component, including the cord or plug, is damaged.
• Unplug the unit before cleaning by hand.
• Only responsible and capable adults should operate the ice maker.
• Do not place the power cord where it could be pulled by children or pose a tripping hazard.
• Children should not be left unattended near the ice maker during operation.
• Do not use water that is micro-biologically unsafe or of unknown quality.
• Do not remove any safety, warning, or product information labels from the unit.
• Do not touch the evaporator with your hands while the ice maker is operating.
• Do not plug in or unplug the unit with wet hands.
• The unit must be placed and set up according to installation instructions before use. The unit is for indoor household use only.
• Do not store or use flammable vapors or liquids near the unit.
• Do not immerse any part of the unit in water.
• Do not attempt to disassemble, repair, modify or replace any part of the ice maker unless permitted by the manufacturer.

FIRE OR EXPLOSION HAZARD Flammable Refrigerant
This unit contains an isobutane refrigerant, also known as R600a, a natural gas with high environmental compatibility. However, it is also combustible. Adhere to the warnings below to reduce the risk of injury or property damage.

1. When handling, installing, and operating the unit, care should be taken to avoid damage to the refrigerant tubing.
2. Only dispose of the unit according to Federal and Local Regulations. Contact your local authorities for the environmentally safe disposal of the unit.
3. Keep ventilation openings around the unit's enclosure clear of obstruction.
4. Do not place the unit near heat sources such as an oven.
5. Ensure a minimum of three inches of clearance around the side and back walls of the unit for proper air circulation.
6. Do not place the unit in direct sunlight.

Questions or Problems?
877-201-4016
help_service_center@outlook.com

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Silonn SLIM21B - Ice Maker Manual