Beok Controls BOT-R7X-WIFI Manual

BOT-R7X-WIFI Gas Boiler Heating Thermostat
Application
Intelligent digital thermostat is a temperature controller suitable
for floor heating systems. Through comparing ambient temperature
and set temperature, it controls the working state of the electric
valve of the floor heating system to adjust the ambient
temperature, which is comfort and energy saving.
Operating Instructions
ON/OFF key: Press the ON/OFF key to turn on and off once;
Press shutdown again while closing all valves.
Mode switch key: In the power-on state, press
working mode. The LCD
display indicates the automatic mode.
Regulation key: In the startup state, press the
temperature will flash, then rotate the outer frame to adjust the
temperature setting.
Clock adjustment: In the power on state, press and hold the
button for 5 seconds. After the icon flashes, rotate the box to
adjust. Press the button to switch between time and week
adjustments, and press the
Lock key function: In the power on state, press and hold the
button for 5 seconds to enter the lock button state on the panel.
A lock icon appears at the bottom of the display screen, indicating
successful lock button locking
Low Temperature Protection Function
Advanced options enter the third option ON, the thermostat is in the
shutdown state, when the indoor temperature is lower than 5 degrees,
the thermostat automatically turns on heating. when the indoor
temperature rises to 5 degrees, the thermostat automatically turns
off heating.
to switch the
indicates the manual mode and the
button and the
button to save and exit.
WiFi Connection
1. When the temperature controller is turned off, press and hold the
- button for 5 seconds. The WiFi icon on the temperature controller
display screen will flash (slowly), and the temperature controller will
enter the code checking state.
2. In the list of (small household appliances) devices, find the
temperature controller product (Bluetooth+WIFI version) in the
specified distribution mode.
3. Click the confirmation button on the page, select the WiFi in the
device's work area that can connect to the internet.
4. Enter the WIFI password, click Next, click "Connect" according to
the page prompts, find the prompt content, dick "Prompt Content".
and return to the Tuya app to enter the distribution process.
Electrical Specification
1. Temperature sensor: NTC
2. Temperature precision: +0.5°C
3. Self- consumed: < 170uW
4. Voltage: 3pcs 1.5V batteries
5. Load current: 3A(negative)
6. Protection grade: IP20
Wiring Diagram
Remark: K1 K2 is a passive linkage of wall-hung furnaces.
Normally Open: Motorized valve remain open
Normally Close: Motorized valve remain close .
Notes: since some circuits of this product involve strong electricity,
which need to be installed by professionals.
Code Matching Process:
1. Power on the receiving panel, the power indicator is long on,
Press and hold the code matching button, and the code matching
indicator flashes.
Code matching key
Output indicator
Code matching indicator
Power indicator