Ingenico Lane 3000 Manual page 26

Using Ingenico Tetra External Devices
Line Item Details on the PIN Pad
It is possible to display line item details on Ingenico TETRA non-mobile devices and the Link/2500 or Move/5000
mobile devices. This feature is automatically enabled as long as the POS/PMS supports it and the required forms
are loaded on the device. The default forms for the TETRA devices support displaying the line items on the majority
of the forms and the line item content is maintained while switching between forms.
Ingenico TETRA Contactless
The Ingenico TETRA devices have the ability to enable or disable contactless processing. Contactless support is
enabled by default. To disable contactless on a configured device, complete the following steps:
1. In UTG TuneUp, click the Devices tab.
2. Double-click the device to be edited.
3. On the Edit Device screen, click the EMV Settings tab.
4. In the EMV settings section, clear Contactless Enabled.
5. Click OK.
6. Click Save.
Tip: For additional information on EMV Settings, see the UTG Installation
and Configuration Guide.
Document v4.2 | UTG v3223+
© 2024 Shift4. All rights reserved.
External Use NDA
Page 26 of 68