Related Manuals for Korno GT-1000 Series
Summary of Contents for Korno GT-1000 Series
- Page 1 Shenzhen Korno Import & Export Co.,Ltd GT-1000 SERIES MULTIFUNCTIONAL GAS AND DUST DETECTOR User Manual - 1 -...
-
Page 2: Table Of Contents
Shenzhen Korno Import & Export Co.,Ltd Contents 1. Warranty -------------------------------------------------------------------------------- 3 2. Product Brief Introduction ----------------------------------------------------------- 3 3. Product Features ----------------------------------------------------------------------- 4 4. Product Structure ---------------------------------------------------------------------- 5/6 5. Technical Parameters ------------------------------------------------------------------ 7 6. Detector instructions------------------------------------------------------------------- 8 6.1.Button Definition --------------------------------------------------------------8 6.2.Charging mode ------------------------------------------------------------------ 8 6.3.Parameter modification -------------------------------------------------------- 8... -
Page 3: Warranty
2. Product Brief Introduction GT-1000 series multifunctional gas detector are portable gas and dust detector which can be configure flexibly up to 5 gas sensors or 3 gas sensors plus 1 dust sensor. With import gas sensors and advanced nanometer semiconductor technology, GT-1000 series multifunctional gas detector can detect corresponding gas and dust concentration at the same time rapidly and precisely. -
Page 4: Product Features
Shenzhen Korno Import & Export Co.,Ltd 3. Product Features With the advanced nanometer semiconductor technology, ultra-low power 32bit microprocessor, 24bit ADC data acquisition chip and high accuracy. 3.5 inches IPS technical grade display with a pixel up to 320*480, display technical ... -
Page 5: Product Structure
Shenzhen Korno Import & Export Co.,Ltd 4. Product Structure - 5 -... - Page 6 Shenzhen Korno Import & Export Co.,Ltd 57mm label back clip 90mm Battery 68mm Android Port| charge Micro printer port - 6 -...
-
Page 7: Technical Parameters
Shenzhen Korno Import & Export Co.,Ltd 5. Technical Parameters Product type ： Multifunctional gas detector(Customize according to user need) Detection Range: Please refer to sensor list at end of this manual Display: Please refer to sensor list at end of this manual... -
Page 8: Detector Instructions
Shenzhen Korno Import & Export Co.,Ltd 6. Detector instructions 6.1.Button Definition Button Icon parameter setting Name Back Cancel/Return to previous menu Move up/ Move left Down Move down/ Move right OK/Menu Enter menu(press and hold for 5 seconds)/ Confirm Pump switch/... -
Page 9: Shortcut Descriptione
The detector will dim out if not operated after 300 seconds. Notice: 1. GT-1000 series multifunctional gas and dust detector could be work normally only in condition of the pump was switched on. Buttons only can be operated when screen light up. -
Page 10: Function Menu Instruction
Shenzhen Korno Import & Export Co.,Ltd Long press the “Power” button, the screen will light up and display the sensor information. It needs about 1 minutes to warm up the gas detector. After power on, the screen will display the configured gas/ gases. - Page 11 Shenzhen Korno Import & Export Co.,Ltd 1. Sensor setting:(as shown in figure 12)User set detection range and units( ppm、 mg/m³、 mg/L、 %VOL)of different gas 2. Channel setting:In this menu user can set to activate/shield one or various gas channels as shown in figure 13,and also allow user to check channel address.
-
Page 12: History Data Log
Shenzhen Korno Import & Export Co.,Ltd 7.2.2 History Data Log User can check history log, view history log curve, export history log and clear history log as shown in figure 21. 1.Check History Log:Press “OK” to enter this sub-menu,the sensor name,quantity of history data will be shown,press “OK”... -
Page 13: Real-Time Curve
2.Do not operate zero calibration for those gases which already exist in the air,such as oxygen,carbon dioxide,nitrogen,dust particle. 3.When GT-1000 series gas detector combined with gas sensors, or with dust sensors, the detector has two calibration functions. 4.When GT-1000 series gas detector combined with dust sensor, the dust sensor doesn’t has calibration functions. -
Page 14: Target Calibration
Dust detector need proceed in a professional dust detection system. GT-1000 series gas detector provide 6 levels target gas concentration calibration,as shown in figure 31-32,this calibration should be operate under conditions of certain standard concentration gas, Pressure reduction valve ,Flow meter, Calibration cover and make sure all instruments are well connected, otherwise this function is forbidden. -
Page 15: Measure Mode
Shenzhen Korno Import & Export Co.,Ltd Procedures: Enter alarm settings sub-menu, Move the cursor to “Enter”,press “Ok” to select and press “Up” and “Down” to switch alarm mode, then press “Ok” to save your modification. 7.2.7 Measure Mode User can choose two measure mode:real time measure and fixed time measure as shown in figure 36.When detector is preset as “real-time... -
Page 16: Print Setting
Shenzhen Korno Import & Export Co.,Ltd 7.2.9 Print Setting Manually print、automatically print are optional in this menu. It can print data via a micro printer(the micro printer is optional accessory). The report will print with company name,count,time and unit of time as shown in figure 40-41. -
Page 17: Common Faults And Solutions
Shenzhen Korno Import & Export Co.,Ltd 8. Common faults and solutions ◆ Problem: Concentration value is not stably when detector place in air, reading is unstable Possible reasons: Electrochemical sensor might interfered with unrelated colorless and odorless gas Solutions: Place detector at pure gas environment to see whether the concentration value decreasing or not,... -
Page 18: History Data Export Instructions
Shenzhen Korno Import & Export Co.,Ltd ◆ Problem: Unable to charge the instrument Possible reasons:Adapter failure or wrong adapter(5-5.5VDC,1-2A) Solutions: Make sure output voltage of adapter is 5V, user need to change a adapter if the output voltage is not 5V, if the problem still remain after change a adapter, user need to return the instrument to manufacturer. -
Page 19: Common Gas Type List
Shenzhen Korno Import & Export Co.,Ltd 11. Common gas type list 0-1000,5000,10000,30000PPM; 0-50,100,500,1000,2000,5000,10000PPM 0-5,25,30,100%VOL 0-100,500,1000,2000PPM 0-2,4%VOL; 0-100%LEL 0-2000,5000,10000,50000PPM; 0-10,20 NH3 0-50,100,500,1000,5000PPM %,50%,100%VOL 0-1,10,20,50,100,500,1000,2000PP CH2O 0-10,20,50,100PPM 0-10,20,50,100,200,500,1000,2000, 0-1,2,5,10,20,50,100,500,1000,2000,5000 5000PPM 0-1,2,5,50,100,250,500,1000,2000, NO2 0-1,20,50,100,500,1000,2000PPM 5000PPM 0-500,1000,5000,20000,40000PPM; CLO2 0-1,5,10,20,50PPM 0-100%VOL 0-100%VOL 0-50,100,500PPM 0-5000,10000,50000PPM; 0-20%, 0-100,500,1000,2000PPM;... - Page 20 Shenzhen Korno Import & Export Co.,Ltd 深 圳 市 科 尔 诺 进 出 口 贸 易 有 限 公 司 ShenZhen Korno Import&Export Co.,Ltd ADD: 2nd Floor,Innovation Building,Qixing Creative Industrial Park,Baotian 1st Road,Xixiang Town, Bao an District,Shenzhen City,Guangdong Province,China...
Need help?
Do you have a question about the GT-1000 Series and is the answer not in the manual?
Questions and answers