Parts List - Masterbuilt GRAVITY 600 Series Manual

Parts List

NO. QTY. DESCRIPTION
1 2 Handle Mount
2 1 Handle Tube
3 1 Lid Assembly
4 1 Hopper Shrouding
5 1 Hopper Lid Assembly
6 1 Hopper Heat Shield - Top
7 1 Warming Rack
8 1 Body Assembly
9 1 Ash Tray Assembly
10 1 Hopper Assembly
11 1 Left Shelf Assembly
12 1 Controller Assembly
13 1 Temperature Probe Bracket
14 1 Temperature Probe
15 1 Front Shelf Assembly
16 1 Hopper Cart Support
17 1 Hopper Gasket
18 1 Hopper Heat Shield - Bottom Front
19 1 Hopper Heat Shield - Bottom Rear
20 1 Hopper Assembly - Bottom
21 1 Hopper Door Assembly
22 1 Hopper Lid Handle
BEFORE ASSEMBLY READ ALL INSTRUCTIONS CAREFULLY.
•
• Assemble on a clean flat surface.
• Recommend assembling on cardboard to avoid oil residue on floors or scratches.
• Gloves recommended for assembly. Hopper gasket is fiberglass and will irritate skin.
• Tools needed: Phillips head screwdriver, adjustable wrench, 19mm socket wrench.
• Approximate assembly time: 1 hour, 45 minutes.
• Recommend two people assemble to increase ease and reduce assembly time.
• Actual product may differ from picture shown.
• It is possible that some assembly steps have been completed in the factory.
• Remove all printed labels from the grill and hopper before use.
NO. QTY. DESCRIPTION
23 1 Hopper Lid Latch
24 2 Smoke + Sear Grates
25 1 Heat Manifold (Grill)
26 1 Front Leg Cross Brace
27 1 Bottom Shelf Assembly
28 1 Heat Manifold Support
29 1 Bottom Tray Assembly
30 1 Meat Probe
31 1 Antenna
32 1 Left Rear Leg Assembly
33 1 Left Front Leg Assembly
34 1 Right Rear Leg
35 1 Right Front Leg
36 1 Air Intake Slide (Small)
37 1 Heat Intake Slide (Large)
38 1 Grease Tray
39 1 Wheel Axle with Lock Nut / 3 Washers / 2 Bushings
40 2 8" Wheel
41 1 Power Cord + 3 Plugs
42 1 Charcoal Grate Assembly
43 2 Lid Handle Washer
44 2 Mica Plate
5