Operations In Multimeterble Software; Multimeter Offline Record (Pc Software) - Owon OW18 Series User Manual

6.To Connect with Computer – Only for OW18B/OW18E

Operations in MultimeterBLE Software

Add meter
: In single or multi-device view, click

Select meter

view. In multi-device view, click a device item to select it, the background is
turned to blue.
Disconnect meter

icon, it will change to
Remote Control

to perform control, just as press the corresponding keys of the multimeter.
Unify the unit types

changed while recording, for example, V is changed to mV. To unify the unite
types, click "Function" on the top right, in the drop down menu, check
"Singleton".

Multimeter Offline Record (PC Software)

When measuring with OW18B/OW18E, you can use PC software to send a
command, the multimeter will start recording the measurements. After receiving
the command, the connection will be disconnected automatically. The multimeter
will record the measuring data in its own memory. After completion of the record,
use PC software to reconnect the multimeter, and then you can read the
measuring data into the Android device as a CSV file. You can use this function to
: In single device view, scroll left or right to switch the meter
: In single or multi-device view, move the cursor over the
, click it.
: In single or multi-device view, the control softkeys
: In Graph&Table view, sometimes the unit type will be
can be short or long pressed
37
softkey on the right.