Operations In Multimeterble Software; Multimeter Offline Record (Pc Software) - Owon OW18 Series User Manual

6.To Connect with Computer – Only for OW18B/OW18E
Graph&Table View
Save the displayed data into .CSV file
Clear the data that is being displayed
Check to auto scroll the data table
Check to unify the unit types in data table
Graph

Operations in MultimeterBLE Software

Add meter
: In single or multi-device view, click

Select meter
: In single device view, scroll left or right to switch the meter view. In

multi-device view, click a device item to select it, the background is turned to blue.
Disconnect meter

icon, it will change to
Remote Control

perform control, just as press the corresponding keys of the multimeter.
Unify the unit types

changed while recording, for example, V is changed to mV. To unify the unite types,
click "Function" on the top right, in the drop down menu, check "Singleton".

Multimeter Offline Record (PC Software)

When measuring with OW18B/OW18E, you can use PC software to send a command, the
multimeter will start recording the measurements. After receiving the command, the
connection will be disconnected automatically. The multimeter will record the measuring
data in its own memory. After completion of the record, use PC software to reconnect the
multimeter, and then you can read the measuring data into the Android device as a CSV
file. You can use this function to record for a long time without staff on duty, while
reducing Bluetooth consumption to conserve the battery power of the multimeter.
Note: When the low battery indicator
: In single or multi-device view, move the cursor over the
, click it.
: In single or multi-device view, the control softkeys
: In Graph&Table view, sometimes the unit type will be
Select device
Data table
softkey on the right.
can be short or long pressed to
appears on the meter screen, the offline
40