Table of Contents
Advertisement
en Childproof lock
13.8 Starting the programme
Requirement: A programme is set.
→ "Setting a programme", Page 30
Press
Start/Reload.
▶
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows the programme
duration or the programme end
time.
a After the programme has ended,
the display shows: End.
13.9 Adding laundry
After the programme starts, you can
remove or add laundry depending on
the programme status.
Press
Start/Reload.
1.
The appliance pauses.
Note: If you want to add laundry,
follow the instructions on the dis-
play.
→ "Display", Page 22
Open the door.
2.
Add or remove laundry.
3.
Close the door.
4.
Press
Start/Reload.
5.
13.10 Cancelling the pro-
gramme
Press
Start/Reload.
1.
Open the door.
2.
The appliance door remains
locked for safety reasons if the
temperature and water levels are
high.
– If the temperature is high, start
the Rinse
– If the water level is high, start
the Spin programme or select a
suitable programme for draining.
→ "Programmes", Page 25
32
programme.
Remove the laundry.
3.
→ "Unloading the laundry",
Page 32
13.11 Unloading the laundry
Open the door.
1.
Remove the laundry from the
2.
drum.
13.12 Switching off the appli-
ance
Turn the programme selector to
1.
Off .
Turn off the tap.
2.
Wipe the rubber gasket dry and re-
3.
move any foreign objects.
Leave the appliance door and de-
4.
tergent drawer open so that resid-
ual water can evaporate.
Childproof lock
14 Childproof lock
Secure your appliance against being
Childproof lock
operated unintentionally using the
controls.
14.1 Activating the childproof
lock
Press and hold the two
▶
buttons for approx. 3 seconds.
a The display shows
a The control elements are locked.
3 sec.
.
Advertisement
Table of Contents
