Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2023 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
TRUCK BED
TAILGATE LADDER
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
23h
TM
59545
Advertisement
Table of Contents
Related Manuals for HAUL MASTER 59545
Summary of Contents for HAUL MASTER 59545
- Page 1 Keep this manual and the receipt in a safe and dry place for future reference. TRUCK BED TAILGATE LADDER Visit our website at: http://www.harborfreight.com 59545 Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
-
Page 2: Important Safety Information
8. Weight capacity and other product capabilities apply Improper installation can create hazards. to properly and completely installed product only. 4. Wear ANSI-approved safety goggles and heavy-duty work gloves during installation. Page 2 For technical questions, please call 1-888-866-5797. 59545... -
Page 3: Ladder Installation
Best screw locations are along the four sides of the plate, not the center of the plate. Note: Rubber bumpers on the Rocker Arms should be facing up. Mounting Plate (E) 59545 For technical questions, please call 1-888-866-5797. Page 3... - Page 4 10. Align holes in Frame and Tubes. Adjust ladder as needed to reach the ground. Secure using two Hex Screws (1), two Flat Washers (5), and Lock Nut (2). Adjust ladder as needed to reach the ground. Page 4 For technical questions, please call 1-888-866-5797. 59545...
- Page 5 Note: Rocker Arms must be parallel with the ground. Rubber feet on the bottom of the Frame must be touching the ground. Ladder must be at least 15 degrees from vertical. 59545 For technical questions, please call 1-888-866-5797. Page 5...
-
Page 6: Maintenance And Servicing
• loose hardware, • misalignment or binding of moving parts, • cracked or broken parts, and • any other condition that may affect its safe operation. Page 6 For technical questions, please call 1-888-866-5797. 59545... - Page 7 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Refer to UPC 193175473752. 59545 For technical questions, please call 1-888-866-5797. Page 7...
-
Page 8: Please Read The Following Carefully
PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Need help?
Do you have a question about the 59545 and is the answer not in the manual?
Questions and answers