Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
250 LB. CAPACITY
TRUCK
LADDER RACK
REV 12b
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2008 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for installation and service may not be included.
Keep this manual for the safety warnings and precautions, installation, operating,
Truck and ladder not included.
Visit our website at: http://www.harborfreight.com
Email our technical support at: tech@harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
ITEM 66187
Advertisement
Table of Contents
Related Manuals for HAUL MASTER 66187
Summary of Contents for HAUL MASTER 66187
- Page 1 2008 by Harbor Freight Tools No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein.
-
Page 2: Installation Precautions
6. This product is not a toy. Do not allow children to play with or near this item. 7. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Item 66187... - Page 3 Installation Bolt from Blind Fastener. * Holding this Wrench still helps prevent the Blind Fastener from turning with the Installation Bolt. REV 12b Item 66187 For technical questions, please call 1-800-444-3353. Note: The Unthreaded Installation Nut (C) is used only to hold the...
- Page 4 7. Attach Ladder Stop (7) to Frame (1) using Carriage Bolt (M), Washer (N), and Nylon Insert Nut (P). 8. Install Strap (8) through the bracket on the Frame (1). 9. Slide the assembled Frame (1) into the Front Base (4). Item 66187...
- Page 5 Drill 1/4″ holes in the locations shown and install the Cleats, using Screws (J), Washers (K), and Nylon Insert Nuts (L). Item 66187 For technical questions, please call 1-800-444-3353. (Bed) Attach the assembly to the Blind Fasteners as shown above using Bolts (E), Washers (F), and Spring Washers (G) - as shown above.
- Page 6 Ladder Stop (7). 3. Use the Straps (8) to wrap around ladder rungs and securely hold the ladder in place using hook and loop system attached to Straps. 2. AFTER USE, wipe external surfaces of the rack with clean cloth. Item 66187...
- Page 7 Flat Washer Ø10 Nylon Insert Nut M10 Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Item 66187 For technical questions, please call 1-800-444-3353. Qty. Part Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.
- Page 8 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 66187 and is the answer not in the manual?
Questions and answers