Use Your Headphones; Connect To Your Bluetooth Device; Control Anc (Active Noise Cancelation) - Philips TAH6509 User Manual

4 Use your
headphones
Connect the headphones
to your Bluetooth device
1
Turn on the Bluetooth function of
your Bluetooth device.
2
Press and hold the MFB button to
turn the headphones on.
The white LED will turn on in
two seconds
The headphones are reconnected
to the last connected mobile
phone/Bluetooth device
automatically
Tip
 If you turn on the Bluetooth function of your
Bluetooth device after turning on the
headphones, you have to go to the Bluetooth
menu of the device and connect the headphones
to the device manually.
Note
 In some Bluetooth devices, connection may not
be automatic. In this case, you have to go to the
Bluetooth menu of your device and connect the
headphones to the Bluetooth device manually.
8 EN
Control ANC (Active Noise
Cancelation)
Different ANC modes can be toggled via
single pressing ANC/Awareness mode
button.
• ANC function is automatically
activated when turn on headphones.
• Press the ANC button once, it will
turn the ANC function off.
• Press the ANC turn once again, it will
change to awareness mode.
ANC ON
ANC OFF
Task Button
ANC ON ANC
button
ANC OFF ANC
button
Awareness ANC
mode button
Quick ANC
awareness button
Awareness
mode
Operation
Single press
Single press
Single press
Press and
hold ANC
button, exit
when release