Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Samsung NK36CB700W33
Summary of Contents for Samsung NK36CB700W33
- Page 1 Range Hood Installation & User Manual NK30CB700W**/NK36CB700W**...
-
Page 2: Table Of Contents
Contents Activates/Deactivates Boost mode Important Safety Instructions Makeup Air Using the lighting Installation Requirements Checking air quality Filter cleaning reminder General Specifications Wi-Fi On/Off Mounting Height Smart ventilation mode Venting Methods Automatic operation to prevent range hood overheating Parts List Language setting Sub-Parts List Entering AP(Access Point) -
Page 3: Important Safety Instructions
Important Safety Instructions 1. FCC Notice APPROVED FOR RESIDENTIAL APPLIANCES FOR RESIDENTIAL USE ONLY READ AND SAVE THESE INSTRUCTIONS CAUTION FCC CAUTION: Any changes or modifications not expressly approved by the PLEASE READ THE ENTIRE INSTALLATION GUIDE BEFORE PROCEEDING. party responsible for compliance could void the user’s authority to operate the INSTALLATION MUST COMPLY WITH ALL LOCAL CODES. - Page 4 Important Safety Instructions FCC RADIATION EXPOSURE STATEMENT: WARNING This equipment complies with FCC radiation exposure limits set forth for an TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, uncontrolled environment. This equipment should be installed and operated so there is at least 8 inches (20 cm) between the radiator and your body.
- Page 5 WARNING WARNING Do not let children near this appliance. Do not let children play with this appliance. TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK. Keep all packaging materials out of children’s reach. Properly dispose the packaging materials after this appliance is unpacked. WARNING Electrical Requirements TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:...
- Page 6 Important Safety Instructions • Follow the electrical connector manufacturer’s recommended procedure. Venting Methods Aluminum/copper connections must conform with local codes and industry To use the hood’s top outlet to vent your hood, a 6” (15.2 cm) round vent system is accepted wiring practices.
-
Page 7: Installation Requirements
Installation Requirements General Specifications Mounting Height CAUTION " (28.5 cm) " (34.8 cm) • Be sure to check the mounting height before installing the product. • The mounting height is measured from the top of the range to the upper cabinets. -
Page 8: Venting Methods
Installation Requirements Venting Methods Parts List Smoke is exhausted to the outside through a special pipe connected to the hood. (Recirculating) Roof Venting Wall Venting Roof Venting Wall Venting (Recirculating) User manual & Template for Hood Mounting Installation manual (2) Installation (1) Bracket (1) Duct Cover Mounting... -
Page 9: Sub-Parts List
Sub-Parts List Needed Parts list (Not Supplied) • Gloves • Safety Glasses • Pencil • Measuring Tape or Ruler • Tape to installation Template • Spirit Level • Phillips Screwdrivers 6 x 130 mm 6 x 30 mm 4 x 10 mm •... -
Page 10: Installation Clearances
Installation Requirements Installation Clearances Making a hole in the furniture Duct hole guide_Op.1 Upper furniture Dimension Cabinet floor drilling work: hood exhaust outlet (damper) cutting work Min 11 " 30" (Min 77.0 cm) (29.0 cm) 36" (Max 90.0 cm) Rear (Wall) Furniture's Center Line "... -
Page 11: Installation
Installation Duct hole guide_Op.2 CAUTION Cabinet floor drilling work: hood exhaust outlet (damper) cutting work • This product must be installed by a professional hood installer. • If the product is installed on a tiled wall or on drywall, there is a risk of the hood falling, so be sure to fix the fixing screws to the concrete behind the wall. -
Page 12: Connecting The Vent System
Installation Connecting the Vent System Check the position for fixing the hood mounting bracket. NK3*CB600W** Assemble the damper or the electric damper for preventing backflow by turning it in to the hood exhaust outlet. NOTE • Damper is provided in NK3*CB600W**. •... -
Page 13: Installing The Range Hood
Installing the Range Hood Remove the cover by loosening the screw on the PCB cover. 10. Fix the hood to the hood mounting bracket installed on the wall. Connect the connector of the electric damper wire and the PCB connector. NOTE Insert the wire into the hole at the top left corner. -
Page 14: Electrical Connection
Installation Electrical Connection 12. Fix the Flexible Duct (6" (15.2 cm)) to 6" (15.2 cm) the hood outlet and the vent on the WARNING wall, respectively, with tape. Assembly and electrical connections must be carried out by qualified technician. WARNING CAUTION •... - Page 15 14-3. Remove the strain relief hole 14-9. Put the wires into the terminal cover in the terminal box and box and install terminal box install a UL/CSA approved strain cover. relief. 14-10. Reconnect power circuit breaker. 15. Attach each magnet to the inner surface of the upper duct cover overlapping with the lower duct cover, and assemble the upper...
- Page 16 Installation 17. Assemble the lower duct cover to 19. When the lower duct cover assembly the hood. Magnets on the upper duct is complete, reassemble the filter in cover hold the lower duct cover in the reverse order of disassembly. place.
-
Page 17: Connect The Filter Support Cable
Connect the filter support cable Installing the Recirculation Kit Remove the filter at the bottom of NOTE the hood. Pass the filter support Same process until No. 14 cable through the wire loop attached on the top of the filter. Make the Assemble the air deflector with the Duct Cover Mounting Bracket knot by passing the hook of the filter... -
Page 18: Electrical Connection
Installation Electrical Connection 9-3. Remove the strain relief hole cover in the terminal box and WARNING install a UL/CSA approved strain relief. Assembly and electrical connections must be carried out by qualified technician. WARNING Electrical Shock Hazard Turn off power circuit at the service panel before wiring this unit. 120 VAC, 15 or 20 Amp circuit required. - Page 19 11. Attach each magnet to the inner 9-9. Put the wires into the terminal surface of the upper duct cover box and install terminal box overlapping with the lower duct cover. cover, and assemble the upper 9-10. Reconnect power circuit breaker. duct cover in a way that it fits the mounting bracket.
- Page 20 Installation 13. Assemble the lower duct cover to 15. Remove the 2 screws from the range the hood. Magnets on the upper duct hood. cover hold the lower duct cover in place. NOTE The Magnet must be attached to the upper line of the Lower Duct.
-
Page 21: Range Hood Description
Range Hood Description 18. Remove the guard by pushing the hook of the guard in the direction of the arrow. 19. Insert the charcoal filter hook by pushing it in the direction of the arrow. 20. Assemble the charcoal filter with the 01 Duct 02 Display 03 Button panel... -
Page 22: Range Hood Overview
– Fine particles about 1/50 of the – Range Hood can be operated by mobile device or tablet with registered diameter of a human hair Samsung products on the SmartThings app. *Diameter of a human hair: 50 - 70 • 10 second press: Activates/deactivates Boost mode Mode button + Light button •... -
Page 23: Turning The Range Hood On Or Off
Turning the Range Hood On or Off First Use Guide • The device turns on with a chime sound, • When you input in the power for the and starts operation in Smart mode. first time, you will see the first use guide Welcome! Welcome! screen. -
Page 24: Changing The Operation Mode
Using the Range Hood Changing the operation mode Smart mode Change the device operation mode as Smart mode is a function that necessary. automatically adjusts the wind strength Smart Smart according to the dust in the kitchen. • Press the button to select the Optimized ventilation operation mode. -
Page 25: Activates/Deactivates Boost Mode
Activates/Deactivates Boost mode Makeup Air • When using ventilation systems with greater than the specified CFM of air Boost mode is a function that allows movement, review local building codes as they may require makeup air systems. powerful exhaust for a short time. Consult an HVAC professional for the specific requirements for your area as the CFM requirements can vary between locales. -
Page 26: Using The Lighting
Using the Range Hood Using the lighting Checking air quality Adjusting the lighting level of the The concentrations of PM10, PM2.5, and product. PM1.0 are shown, and the air quality is Smart Smart shown with color indicators that rate the •... -
Page 27: Filter Cleaning Reminder
Filter cleaning reminder Wi-Fi On/Off This function informs you when you need This feature turns the product's Wi-Fi on to clean the filters. or off. Filter needs Cleaning Filter needs cleaning 1. Press the button for 5 seconds. • If an audible alarm is sounded and 'Filter needs cleaning' appears on the front Hold for info... -
Page 28: Smart Ventilation Mode
Using the Range Hood Smart ventilation mode 4. If you operate for 1 hour in smart ventilation mode, it will be turned off Smart ventilation turned off Smart ventilation turned Smart ventilation mode is a function that automatically. off after 1 hour after 1 hour can measure the kitchen air quality when Smart ventilation turned on... -
Page 29: Language Setting
Entering AP(Access Point) Language setting 1. Press and hold the button for Changing the Hood's Language. 5 seconds, following the instructions of the app. • The default language is English, and you can choose English, Español, or Français. 2. Enter AP mode. 1. -
Page 30: Ai Energy Mode
Using the Range Hood AI Energy Mode Bixby • Bixby is the name of Samsung's artificial intelligence solution which makes it AI Energy Mode is a function that saves possible to control the product through voice. energy when usage needs to be reduced... -
Page 31: Cleaning And Maintenance
Cleaning and Maintenance Cleaning the sensor unit NOTE • The dust concentration may vary depending on the usage environment (around 1. Please remove the sensor cover on the the construction site, around the roadside, using vacuum cleaners, cleaning left side of the lower duct cover. blankets / clothes, around fabric sofas, etc.). -
Page 32: Cleaning The Filters
Wi-Fi, 3G, LTE, 5G or other wireless networks. If the Wi-Fi disconnects, please follow the CAUTION instructions in the Samsung SmartThings app via your mobile device or tablet. You can easily install the SmartThings app or use the product with your smartphone by scanning When separating the filter, use both the QR code on the attached label. - Page 33 2. Registering your Samsung account 2. Connecting the SmartThings app to Downloading the Connecting the SmartThings your product • A Samsung account is required to SmartThings app and app to your product use the SmartThings app. • Follow the instructions displayed registering your Samsung 1.
-
Page 34: Open Source Announcement
• The product supports the Are there any foreign IEEE802.11 b/g/n (2.4 GHz) Please wipe off the foreign substances on the exterior communication protocol. (Samsung substance. recommends IEEE802.11n.) of the product? • If your Internet service provider Hood Operation... -
Page 35: Information Codes
C489 If it is not resolved, please contact a communication is not Press the POWER button to restart the C154 Samsung Electronics Service Center. C493 working with Inverter product. If the problem persists, disconnect the C496 power for more than 30 seconds. -
Page 36: Warranty (Usa)
SAMSUNG authorized servicer is not available, you may be responsible for a trip charge or required to bring the product to a SAMSUNG installation is not covered by this limited warranty. Please contact SAMSUNG at the authorized service center for service. -
Page 37: Warranty (Canada)
THE CLAIM IS BASED, EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY SAMSUNG will repair or replace this product, at our option and at no charge as OF SUCH DAMAGES. Some states do not allow exclusions or limitations of... - Page 38 OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE, OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS BASED, EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG AND CAUSING THE ALLEGED DAMAGE.
- Page 39 Memo...
- Page 40 QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support - Consumer Electronics www.samsung.com/ca/support (English) CANADA 1-800-SAMSUNG (726-7864) www.samsung.com/ca_fr/support (French) DG68-01416B-03...