Clock Display; Date; Volume; Visibility Parameters - Miele PWM 514 Operating And Installation Instructions

Clock display

Date

Volume

Visibility paramet-
ers

Sort Extras

Machine off status In order to save energy, the washing machine will switch off automat-
After selecting the clock format, you can set the time of day.
Clock format
- 24 h clock
- 12 h clock
- No clock
Set
- The time can be set.
The date can be set after selecting the date format.
Date format
- DD.MM.YYYY
- YYYY.MM.DD
- MM.DD.YYYY
Date
- The date can be set.
The volume for various sounds can be changed.
- Finish tone
- Keypad tone
- Welcome tone
It can be set to one of 7 different levels or switched off altogether.
- Fault tone
The fault tone can be activated or deactivated.
Various parameters, such as the temperature, spin speed, Extras,
etc., are displayed when a programme is selected. You can decide
which parameters should not be displayed. These parameters can
then not be edited during programme selection.
Factory default: all parameters are visible (marked in orange)
Under the setting

Visibility parameters

bottom line. Touch the sensor control to change the sequence of Ex-
tras (see "Supervisor level – Arranging programmes").
ically after the end of the programme or if no further selection is
made. You can change this setting.
Changing this setting leads to increased energy consumption.
- No switch off
- Switch off after 15 minutes (factory default)
- Switch off after 20 minutes
- Switch off after 30 minutes
Supervisor level
, Sort "Extras" appears in the
55