Dab Operation - JVC RA-E313B-DAB Instruction Manual

DAB OPERATION

NOTE: Extend the telescopic antenna to its full length to get the best reception, or place the unit in an
open location.
If the unit is connected to the mains power and then switched on for the first time, the unit will
automatically enter into the DAB mode and perform auto scan function. During the scan the
display will show <Scanning...> together with a slide bar that indicates the progress of the scan
and the amount of stations that have been found so far. Once the scan has finished, the unit
will select the first alphanumerically found station.
To explore and listen to the found stations press the TU+/TU- buttons to select, then press the
VOLUME/SELECT knob to confirm.
Full Scan
The Full Scan will search for the entire DAB+ Band III channels.
• To activate Full Scan, press the BACK/SCAN button or press and hold the MENU/INFO
button, and then select <Full Scan>.
• Once a full scan is complete, the radio returns to play the previously selected station or first
station on the station list.
Manual tuning
This can help you align your antenna or add stations that are missing after a full scan.
• Press and hold the MENU/INFO button to enter the menu, and then select <Manual tune>.
• Turn the VOLUME/SELECT knob or press the TU+/TU- buttons to select your desired DAB
channel, then press the knob to confirm.
NOTE: DAB channels are numbered from 5A to 13F. You will not see any new radio stations or hear
anything during manual tuning.
DAB Display (Info.)
To view further information about the station you are listening to press the MENU/INFO button,
the display will show the following information:
- Signal Strength as slide bar to indicate the signal strength
- Program Type
- Name of the multiplex
- Frequency
- Signal Error
- Bitrate
- Time / Date
- DLS / Dynamic label segment is a scrolling message that the broadcaster may include
with their transmissions. The message usually includes information, such as program
details, etc.
Prune Invalid
You may remove all unavailable stations from the list.
• Press and hold the MENU/INFO button to enter the menu, and then select <Prune>.
• Turn the VOLUME/SELECT knob or press the TU+/TU- buttons to select <Yes> to confirm
the removal, or select <No> to cancel, then press the knob to confirm.
EN