Electrolux EW6F4823ABM User Manual page 22

22 www.electrolux.com
Make sure that the flap does not cause a
blockage when you close the drawer.
11.5 Setting a programme
1. Turn the programme dial to select the
desired washing programme.
The indicator of the Start/Pause
button flashes.
The display shows an indicative
programme duration.
2. To change the temperature and/or
the spin speed, touch the related
buttons.
3. If desired, set one or more options by
touching the related buttons. The
related indicators illuminate on the
display and the given information
changes accordingly.
If a selection is not possible
an acoustic signal sounds.
11.6 Starting a programme
Touch the Start/Pause
the programme.
The related indicator stops flashing and
stays on.
The programme starts, the door is
locked. The display shows the indicator
.
The drain pump can operate
shortly before the appliance
fills water.
11.7 Starting a programme with
the delay start
1. Touch the Delay Start
repeatedly until the display shows the
desired delay time. On the display the
indicator shows
2. Touch the Start/Pause
appliance door locks and starts the
countdown of the delay start. The display
shows the indicator
When the countdown is completed, the
programme starts automatically.
Cancelling the delay start after
the countdown has started
To cancel the delay start:
1. Touch the Start/Pause
2. Touch the Delay Start
3. Touch the Start/Pause
Changing the delay start after
the countdown has started
To change the delay start:
1. Touch the Start/Pause
2. Touch the Delay Start
button to start
3. Touch the Start/Pause
11.8 The SensiCare System
load detection
After touching the Start/Pause
button:
1. The SensiCare System starts
button
.
pause the appliance. The related
indicator flashes.
repeatedly until the display shows
and the indicator
again to start the programme
immediately.
pause the appliance. The related
indicator flashes.
repeatedly until the display shows the
desired delay time.
again to start the new countdown.
estimating the weight of the load to
calculate the real programme
duration. During this phase the Time
Manager bars
time digits play a simple animation.
button. The
.
button to
button
goes off.
button
button to
button
button
placed below the