Table of Contents
Advertisement
Have you completed the steps of "Automatic memory presetting"
on page 31 or "Manual memory presetting" on page 32?
Carry out the steps 1 and 2 of "Standard Operations" on page
20
.
Press one of the preset-tuning buttons to select
the desired channel.
JLooiM is excessive In FM broadcasts
Press the FM mode button.
The sound wilt then be heard as monaural sound and the FM
stereo indicator will not illuminate; the "MONO" FM mode indicator
will then illuminate instead of the "AUTO" indicator. If the
broadcast signal is weak, sounds can be heard more clearly (than
in the stereo mode) by pressing the FM mode selector.
Press this button to select low-order presets.
Press this button to select high-order presets.
■ Back-up memory
The Back-up function maintains the (veset memory and the
most-recent memory, If the power cord is disconnected. The
memory will be maintained for as long as approximately 2 weeks.
Most-recent moemory:
The most-recent memory system "remembers" ttie broadcast
station last tuned to when the unit was switched to standby mode.
That station will be automaticaily tuned to when the power is
switched ON.
If frequency presettings are accidentally erased:
1. Switch ON the power.
2. Make the frequency presettings (on page 31 or 32) once again.
-
33
-
Advertisement
Table of Contents
