Advertisement
4.
OPERATION
WARNING! Ensure that you read, understand and apply the safety instructions in Section 1.
‰
4.1.
Select the appropriate separators (fig.1.1 or fig.1.2).
4.2.
Assemble the separators around rear of bearing and clamp together using the studs and nuts.
4.3.
Screw the threaded ends of the two puller rods into the separators (fig.1.5 or fig.1.7)
4.4.
Fix the cross beam (fig.1.3) to the puller rods using the nuts and washers provided. DO NOT tighten at this stage.
4.5.
Thread the thrust bolt (fig.1.4) through the cross beam until it contacts the centre of the shaft.
4.6.
Tighten the thrust bolt to gradually pull the bearing free.
WARNING! If the workpiece does not move when maximum puller force is applied, DO NOT hit it, or the puller, in an attempt to jar it
‰
free. Damage to puller/workpiece and personal injury may result. Use a larger capacity puller.
5.
MAINTENANCE
Keep all items clean and lightly oiled.
9
Keep all threads free from grit and lubricate the thrust bolt regularly.
9
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved
containers and dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
PS984.V4
REGISTER YOUR
PURCHASE HERE
Issue 1
05/12/23
Advertisement
