Kenwood KT-5020 Instruction Manual page 12

For other Countries
FIV1 tuner Section
Tuning frequency range .87.5 MHz - 1 08 MHz
Usable sensitivity (MONO).0.95 juV/10.8 dBf
50 dB quieting sensitivity
MONO .....1.8 /aV/ 16.2 dBf
STEREO --*....— 24 /aV/38.8 dBf
Total harmonic distortion (at 1 kHz)
MONO ....^.0.Q4% (WIDE)
STEREO.......0.06% (WIDE)
Signal to noise ratio (at 1 kHz, 85 dBf input)
MONO ______,_88 dB
STEREO ....-...82 dB
Stereo separation
1 kHz ------55 dB (WIDE )
Captuer ratio ..1.0 dB (WIDE). 2.5 dB (NARROW)
Alternate channel selectivity
(± 400 kHz)...60 dB (WIDE)
Image rajection ratio (at 98 MHz).....„82 dB
IF rejection ratio (at 98 MHz).11 0 dB
Spurious rejection ratio (at 98 MHz) .1 05 dB
AM suppression ratio ..._76 dB
Frequency response
(20 Hz-15 kHz) _.___+0.5 dB, -0.5 dB
Output level/impedance
(at 1 kHz, 100% dev.).0.6V/3.3kf2
AM Tuner Section
Tuning frequency range
531 kHz - 1,602 kHz.. 9 kHz step
530 kHz-1,610 kHz .... 10 kHz step
Usable sensitivity.... 10 jaV (350 /tV/m)
Signal to noise ratio
(at 30% mod. ImV input) ...52 dB
Total harmonic distortion .....0.3%
Image rejection ratio (Loop).40 dB
Selectivity .....30 dB
Output level/impedance
(at 30% mod.) ...0.1 8 V/3.3 kO
General
Power consumption _____1 5 w Power consumption _____
1 5
w
Dimension ..W: 440 mm (1 7-5/1 6")
H: 98 mm (3-7/8")
D: 318 mm (12-1/2")
Weight .....„.4.3 kg (9.46 lb)
For Europe type
FM tuner Section
Tuning frequency range ..87.5 MHz- 108 MHz
Usable sensitivity (DIN)
MONO ..0.7
fx,V
STEREO .25/iV
Limiting level (DIN at 75 ft) ..0.45
fiV
Total harmonic distortion (DIN at 1 kHz)
MONO ...0.07% (WIDE)
STEREO .0.2% (WIDE)
Signal to noise ratio
(DIN weighted at 1 kHz, 65.2 dBf input)
MONO . 78 dB
STEREO . 67 dB
Stereo separation (DIN)
1 kHz .52 dB (WIDE )
6.3 kHz.42 dB (WIDE)
Captuer ratio.1.0 dB (WIDE), 2.5 dB (NARROW)
Alternate channel selectivity
(DIN ± 300 kHz) .75 dB (NARROW)
Image rajection ratio (at 98 MHz)...82 dB
IF rejection ratio (at 98 MHz).... 1 1 0 dB
Spurious rejection ratio (at 98 MHz) . 1 05 dB
AM suppression ratio .76 dB
Frequency response
(20 Hz- 15 kHz) .+0.5 dB, -0.5 dB
Output level/impedance
(at 1 kHz, 100% dev.)...0.6V/3.3kft
MW Tuner Section
Tuning frequency range ....531 kHz- 1,602 kHz
Usable sensitivity.10
fiV
(350 /tV/m)
Signal to noise ratio
(at 30% mod. ImV input) .52 dB
Total harmonic distortion .0.3%
Image rejection ratio (Loop).40 dB
Selectivity .30 dB
Output level/impedance
(at 30% mod.) ..0.1 8 V/3.3 kft
LW Tuner Section
Tuning frequency range.1 53 kHz- 281 kHz
Usabel sensitivity.1 0 jaV (600 jaV/m)
Signal to noise ratio
(at 30% mod. ImV input) .50 dB
Total harmonic distortion .0.4%
Image rejection ratio (Loop).40 dB
Selectivity .. 30 dB
Output level/impedance
(at 30% mod.) ...0.1 8 V/3.3 kft
General
Power consumption .....15 W
Dimension .W: 440 mm
H: 98 mm
D: 318 mm
Weight (Net) .....4.3 kg
KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed *
1 2
KT-5020 (£n)