Dell OptiPlex 210L User Manual page 98
Hide thumbs
Also See for OptiPlex 210L:
- Quick reference manual (258 pages) ,
- Features (2 pages) ,
- Quick reference manual (128 pages)
Table of Contents
Advertisement
Back View
1 card slots
Access connectors for any installed PC Cards.
2 back-panel
Plug serial, USB, and other devices into the appropriate connector.
connectors
3 power
Insert the power cable into this connector.
connector
4 voltage
Your computer is equipped with a manual voltage-selection switch. To
selection
help avoid damaging a computer with a manual voltage-selection switch,
switch
set the switch for the voltage that most closely matches the AC power
available in your location.
NOTICE:
In Japan the voltage selection switch must be set to the 115-V
position.
Also, ensure that your monitor and attached devices are electrically rated
to operate with the AC power available in your location.
5 padlock ring
Insert a padlock to lock the computer cover.
6 cover release
Use this latch to open the computer cover.
latch
Back-Panel Connectors
1
parallel
Connect a parallel device, such as a printer, to the parallel connector. If
connector
you have a USB printer, plug it into a USB connector.
NOTE:
The integrated parallel connector is automatically disabled if the
computer detects an installed card containing a parallel connector
configured to the same address. For more information, see
Setup
Options."
2
link integrity
Green — A good connection exists between a 10-Mbps network
l
light
and the computer.
Orange — A good connection exists between a 100-Mbps network
l
and the computer.
Yellow — A good connection exists between a 1-Gbps (or 1000-
l
Mbps) network and the computer.
Off — The computer is not detecting a physical connection to the
l
network.
3
network
To attach your computer to a network or broadband device, connect one
adapter
end of a network cable to either a network jack or your network or
connector
broadband device. Connect the other end of the network cable to the
network adapter connector on the back panel of your computer. A click
indicates that the network cable has been securely attached.
NOTE:
Do not plug a telephone cable into the network connector.
On computers with a network adapter card, use the connector on the
card.
"System
Advertisement
Table of Contents
