Dell OptiPlex 210L User Manual page 85

Expansion Bus
Bus type
Bus speed
Cards:
PCI:
connectors
connector size
connector data width
(maximum)
PCI Express:
connectors
power
connector size
connector data width (maximum)
Drives
Externally accessible
Internally accessible
Connectors
External connectors:
Serial
Parallel
Video
Network adapter
USB
Audio
System board connectors:
Primary IDE drive
Serial ATA
Floppy drive
Fan
PCI 2.3
CD drive audio interface
Front panel
Key Combinations
<Ctrl><Alt><Del>
<F2> or <Ctrl><Alt><Enter>
<Ctrl><Alt><b>
<F12> or <Ctrl><Alt><F8>
PCI 2.3
SATA 1.0a
USB 2.0
PCI Express 1.0a
PCI: 33 MHz
SATA: 1.5 Gbps and 3.0 Gbps
USB: 480 Mbps
PCI Express x1: 5 Gbps
full-height cards supported
two
120 pins
32 bits
one x1
10 W maximum
36 pins
one PCI Express lane
one 3.5-inch drive
two 5.25-inch drive bays
two bays for 1-inch-high hard drives
9-pin connector; 16550C-compatible
25-hole connector (bidirectional)
15-hole VGA connector
RJ45 connector
two front-panel and four back-panel USB 2.0–
compliant connectors
three back connectors for line-in, line-out, and
microphone; one front-panel connector for
headphones
40-pin connector
two 7-pin connectors
34-pin connector
5-pin connector
120-pin connector
4-pin connector
40-pin connector
in Microsoft® Windows® XP, brings up the Windows
Security window.; in DOS mode, restarts (reboots)
the computer
starts embedded system setup (during system start-
up only)
automatically starts the computer from the network
environment specified by the remote boot
environment (PXE) rather than from one of the
devices in the system setup Boot Sequence option
(during system tart-up only)
displays a boot device menu that allows the user to
enter a device for a single boot (during system start-
up only) as well as options to run hard-drive and
system diagnostics