Initial Use; Preparation - Beko CN1602502XB User Manual

Table of Contents

Advertisement

4

Preparation

The baskets/drawers that are provided with the
chill compartment must always be in use for
low energy consumption and for better storage
conditions.
Food contact with the temperature sensor in
the freezer compartment may increase energy
consumption of the appliance. Thus any
contact with the sensor(s) must be avoided.
Do not put hot food and beverages inside the
product.

4.3. Initial use

Before starting to use the product, check that all
preparations are made in accordance with the
instructions in sections "Important instructions for
safety and environment" and "Installation".
Clean the interior of the product as
recommended in the "Maintenance and
cleaning" section. Check that inside of it is dry
before operating it.
Plug the product into the grounded wall
outlet. When the door is opened the interior
illumination will turn on.
Run the product without putting any food for 6
hours and do not open its door unless certainly
required.
C
You will hear a noise when the compressor
starts up. The liquids and gases sealed
within the refrigeration system may also
give rise to noise, even if the compressor is
not running and this is quite normal.
C
Front edges of the product may feel warm.
This is normal. These areas are designed
to be warm to avoid condensation.
C
In some models, the instrument panel
automatically turns off 5 minutes after
the door has closed. It will be reactivated
when the door has opened or pressed on
any key.
Refrigerator / User manual
11 /36EN

Advertisement

Table of Contents
loading

Table of Contents