Select The Language; Connect To Other Devices; Connect To A Playback Device Through Hdmi - Philips NeoPix 530 User Manual

Hide thumbs Also See for NeoPix 530:
Table of Contents

Advertisement

Screen height adjustment
To adjust the screen height when placing
the projector on a flat surface, turn the angle
adjustment knob located at the bottom of the
projector.
Image shape adjustment
V/H Keystone
You can manually make the image rectangular
by adjusting the horizontal and vertical
keystone angles.
1
Press
on the remote control to open
the settings menu, go to Projector > V/H
Keystone and press the OK button.
2
Follow the on-screen instructions to adjust
the image shape.
Four Point Keystone
You can manually make the image rectangular
by moving four corners of the image.
1
Press
on the remote control to open the
settings menu, go to Projector > Four Point
Keystone and press the OK button.
2
Follow the on-screen instructions to adjust
the image shape.

Select the language

When you turn on the projector for the first
time or after it was reset to its factory default
settings, the projector system will start and
prompt you to select the language.
Press the navigation buttons to select your
preferred display language and press the
OK button to confirm. The home screen then
appears.
After selecting the language, you can start
using the projector or continue to make other
adjustments.
Tip: To change the language later, press
the remote control to open the settings menu,
then select System > Language.
10
4 Connect to other
devices
Connect to a playback
device through HDMI™
You can connect a playback device (e.g. a Blu-
ray player, gaming console, camcorder, digital
camera or PC) to the projector through HDMI™
connection. With this connection, images are
shown on the projection screen, and audio is
played on the projector.
1
Using an HDMI™ cable, connect the HDMI™
1 or HDMI™ 2 port on the projector to an
HDMI™ output port on a playback device.
Phones
Tablets
Computers
2
If the input source is incorrect, press
on the remote control to bring up the
input source list, and then select HDMI1 or
HDMI2.
on
USB
HDMI™ 1
HDMI™ 2
USB-C
Smart Sticks
Game consoles
DVD/VCR
Philips · NeoPix 530

Advertisement

Table of Contents
loading

Table of Contents