Sanyo KHS0921 Instruction Manual page 6

Remote Control Unit
Transmitter
MODE selector switch
Timer selector switch
Fan speed selector switch
SENSOR
Display
ON/OFF operation button
Temperature setting buttons
Timer setting buttons
PROGRAM button
NIGHT SETBACK button
Cover
SWEEP button
Transmitter When you press the buttons or move the switches on the remote control
unit, the lamp at the tip of the unit flashes to transmit the setting
changes to the receiver in the air conditioner.
Display Information is displayed while the remote control unit is switched on.
The display shows the time and the room temperature at the remote
control unit when the unit is switched off.
ON/OFF operation button This button is for turning the air conditioner on and off.
Cover The cover opens from the left. Just pull it open.
Temperature setting Press "COOLER" button to change the set temperature down.
buttons Press "WARMER" button to change the set temperature up.
Timer setting buttons
PROGRAM button
NIGHT SETBACK button
You can press the temperature setting buttons keeping the cover closed.
First, press the PROGRAM button to select the mode you want.
Each time you press "HH" button, the hours advance by one.
Each time you press "MM" button, the minutes advance by one.
For details, see "Setting the Timer".
Press this button to select the mode you want to program.
For details, see "Night Setback Mode". When you press this button in
the COOL mode, the ( * ) mark appears at the lower left of the
display, and the remote control unit will automatically adjust the set
temperature to save energy.
6
07
-
346-06