Sanyo KHS0921 Instruction Manual page 10

Operation with the Remote Control Unit (continued)
If the outdoor temperature is too cool:
When the outdoor temperature stays at around 59° F, the air conditioner
suspends the cooling operation and the STANDBY (orange) lamp keeps on
flashing.
When it becomes warmer, the air conditioner automatically resumes the
cooling operation.
STEP 1
Night Setback Mode
in Cooling STEP1: Press the NIGHT SETBACK button in cooling.
The (
★
) mark appears at the lower left of the display.
Press the NIGHT SETBACK button again to release the night setback
function. This button has no effect in the FAN mode.
Room
Setting temperature
What does the Night In this mode, the air conditioner will cool the room to the set temperature.
Setback mode mean? and then the thermostat will make the unit pause. After about 30 minutes,
the air conditioner will automatically raise the set temperature by 2° F. When
the room temperature reaches the newly set value, the thermostat will cause
the unit to pause. After about 30 minutes the temperature will again be
raised by 2"F. This enables you to save energy without sacrificing comfort.
This function is convenient when gentle cooling is needed.
2. Adjusting the
Fan Speed
A. Automatic STEP 1: Simply set the FAN SPEED selector to the "AUTO" position.
A microcomputer in the air conditioner automatically controls
the fan speed when the AUTO mode is selected. When the air
conditioner starts operating, the difference between the room
temperature and the set temperature is detected by the
microcomputer which then automatically switches the fan
speed to the most suitable level.
10
07
-
346-10