Table of Contents
Advertisement
3-(3)
Removal of Pickup Base Ass'y
1. Remove the anti-skating cover as shown in Fig. 14.
2. Remove scress Qa) - (6) as shown in Fig. 15.
Fig. 14
@
®
ground
3-(4)
Reassembly of Pickup Base Ass'y
1. Push the switch lever by top of the finger as shown in
Fig. 16, then mount the pickup base ass'y.
So that, the stad of the arm lever is located as shown in
Fig. 17.
Note:
Check
the ground
as shown
in Fig. 15 to keep
away from the arm lever.
Fig. 15
Anti-skating Lever
Arm lever
Stud
Switch lever
Arm lever Stud
Fig. 16
Fig. 17
3-(5)
Reassembly of Anti-skating Lever
When mounting the anti-skating lever, set the anti-skating knob to ''O"' position.
4. Stylus Replacement or-ssn
Replacement of the stylus can normally be done easily by
removing
the worn
stylus from the cartridge
body
and
replacing it with a new stylus as shown in Fig. 18.
QL-F300
Sigh
No. 2650
Advertisement
Table of Contents
