Panasonic AFP7DA4H User Manual page 50

8.3 List of Unit Memory
Unit memory
number
Name
(Hex)
Function setting
● Offset / Gain
UM 0010A
UM 0011A
● Scale conversion
UM 0012A
● Upper and lower
UM 0013A
● Analog output in
(Note 1) The unit memory numbers in the above table are listed for CH0, CH1, CH2, and CH3 in numerical
order.
■
Individual setting area per channel
Unit memory
number
Name
(Hex)
UM 0010B
UM 0011B
Offset value
UM 0012B
UM 0013B
UM 0010C
UM 0011C
Gain value
UM 0012C
UM 0013C
UM 0010D
UM 0011D
Scale conversion max.
value
UM 0012D
UM 0013D
UM 0010E
UM 0011E
Scale conversion min.
value
UM 0012E
UM 0013E
UM 0010F
UM 0011F
Upper limit for upper and
lower output clipping
UM 0012F
UM 0013F
8-6
processing
output clipping
PROG. mode
Default Setting range and description
H10: Current output 0 to +20 mA
H20: Current output +4 to +20 mA
Select the function to be used.
bit Name
Analog output
3-0 in PROG.
mode
H0 Offset / Gain
7-4
processing
11- Scale
8 conversion
Upper and
15-
lower output
10
clipping
Default Setting range and description
Set an offset value at the time of using the offset /
gain processing function.
K0
Setting range: -3,000 to +3,000 (Specified with a
signed integer)
Set an offset value at the time of using the offset /
gain processing function.
K10,000
Setting range: +9,000 to +11,000 (0.9x to 1.1x:
Specified with a signed integer)
Set the maximum value at the time of using the
scale conversion function.
K10,000
Setting range: -30,000 to +30,000 (Specified with a
signed integer)
Set the minimum value at the time of using the scale
conversion function.
K0
Setting range: -30,000 to +30,000 (Specified with a
signed integer)
Set the upper limit to turn ON the upper limit relay
for the use of the function of clipping upper and
lower output.
K0
Setting range: -32,500 to +32,500 (Specified with a
signed integer)
Settings
H0: Non-hold (Output OFF)
H1: Current value held
H2: Desired value held
H0: Not execute
H1: Execute
H0: Not execute
H1: Execute
H0: Not execute
H1: Execute
WUME-FP7AOH-03