Sharp VC-A105B Operation Manual page 16

RECORDING WITH THE TIMER
OPERATE button
Timer setting buttons
[El 16
@/ © buttons
STOP button
The Timer can be set for automatic recording of 8 programmes over a 365-day
period. In addition, each of the programmes can be set to record on a daily or
weekly basis up to the limit of the tape. The Timer recording setting controls
are situated on the remote control.
EXAMPLE: To Rocrelroh caetalcl 72 icoitel Chee) co) 10)-6.0) celal Tuesday, Tth of
IETeele at's) fa tnteu desis eleeeiclaslans: lest tlege The Joe time is
10:28 on Friday, 17th of February 1989.
@ Load the cassette, ensuring the erasure protection hole is covered. The
VCR power will automatically turn ON.
Check that the clock is displaying
the correct date and time of day.
(See SETTING THE CLOCK page 6.)
Press the PROG button. "[© @)]"
and the programme position number
"1" starts flashing. To select one of
the other 8 programme numbers
press the Gor © button.
Press the PROG button. "1" is
steady and "17" starts flashing. Set
the timer recording day's digits (07 in
this example) using the @) or
button.
Press the PROG button. "07" is dis-
played and "02" starts flashing. Set
the recording month's digits (03 in
this example) using the @ or ©
button.
Ny
prog 1
Posi, zi xn