Table of Contents
Advertisement
The CT-600
can
be connected
directly to a tape
recorder or deck for recording. In this case connect
the CT-600 Fixed Output jacks to the tape deck or
recorder input jacks, being careful not to mistake left
and right channels (see Fig. 10)
Note:
In this case the output level cannot be con-
trolled; adjust the recording level with the
recorder input controls.
€ Service Pads
Use the service pads to protect the upper panel of
the CT-600 when another unit is placed on it.
Peel off the tape and stick a pad to each foot of
the
other unit before placing
it on top of the
CT-600.
€ Hexagonal Wrench
Use this wrench to loosen the Function selector if
its settings do not match the markings on the panel
(see Fig. 11).
TAPE DECK
FUNCTION
FM— AUTO
Гмомо,
1
> АМ
HEXAGONAL
WRENCH
SERVICE
PAD
Advertisement
Table of Contents
