1. Scope This document illustrates step-by-step disassembly process of ABB fusegear SLE 1. To disassemble ABB fusegear SLE 2, SLD 00 and 000, SLD-FHD 00 and 000 this document can successfully be used with just few differences to be considered.
Page 3
Disassemble of Door Disassemble the door from the base part manually. Unscrew the five marked screws. Disassembled parts 5 Screws (metal) 3 fuse holders (metal) 1 Door (Plastic)
Page 4
Disassemble Base part Lock up the cable cover. Unscrew the three screws marked below, follow by removing the cover. Remove the plastic cover and continue with removing the conductors and contact parts L1 L2 L3...
Page 5
Disassembled parts 3 screws (metal) 3 contact parts (Al, Sn) 3 conductor parts (Cu, Sn) 3 profile screw (metal) 3 cable clamp with screw (Al, Sn) 1 Basepart (plastic) 1 Cable cover and cover (plastic)