Table of Contents
Advertisement
4.3 Configuring the settings with one LED controller connected to the PC using a USB cable
Connect the LED controllers and the LED modules with LAN cables.
Terminate the Backup system connection at the RJ-45 connector located top left on the last module in the
daisy chain connection.
LED modules
LED-FE/FC
LED-E
LED controllers
* For the MCTRL 4K LED controller, the way to make connections is similar to this example.
Start the control software NovaLCT and log in with the administrator privileges.
Display the login screen as follows: User(U) -> Advanced Synchronous System UserLogin(A). Enter the
password ("admin") to log in with the administrator privileges.
Click "Screen Configuration".
English - 92
Advertisement
Table of Contents
