Table of Contents
Advertisement
Uses of Lenses
Changing Lenses
1
Be sure to unlock the metering lever lock.
It the
metering lever
is pressed or is locked,
the
red
dot appears inside the camera
mount.
The pre·set
aperture pin, at the back end of the lens, cannot be
connected to the coupling part on the camera body and
the
pre·
set aperture will not function
.
2
Remove the lens from the camera body by turning
the bayonet ring of the lens to the left until the recj
dot on the lens coincides with the red dot on the camera
mount.
3
Mount the lens by matching the red dot of the len$
to the red dot on the camera
mount.
Turn the
bayo·
net ring to the right and fasten
.
Before
mounting,
turn
the bayonet ring of the lens sufficiently to the left and
align the red dot and guide pin of the lens.
•
Attach the lens quickly in the
shade.
The film will
sometimes become foggy if the lens is left unattached
.
•
Whenever a lens is removed
,
be sure to put on its
dust cap to protect the aperture pin
.
•
When not in use for a long time, protect the mirror
with a flange cap
.
30
Advertisement
Table of Contents
