Sharp DR-P520 User Manual page 20

20
• Station name or frequency – e.g., BBC R4,
93.30MHz
• Signal
• Power status
Bluetooth
Enter Bluetooth mode by short pressing
until the radio displays <Bluetooth>.
Your radio will enter pairing mode. Ensure the
device you are trying to connect the radio to has
Bluetooth enabled.
NOTE: If necessary, refer to the instructions for your
device to add or set up Bluetooth.
Search the available Bluetooth device list for
'SHARP DR-P520' and select it to connect. Once
connected, the display will read <BT connected>.
The Bluetooth connection should have a range
of up to 10m (line of sight). Walls or other objects
which obstruct the line of sight will reduce the
effective range.
Your device will remain paired with the radio
unless you decide to disconnect it or turn off a
device.
To disconnect from Bluetooth, long press
for 3 seconds to unpair your current device and
search for new devices.
Wirelessly stream music via
Bluetooth
In Bluetooth mode, you can wirelessly stream
audio through the radio's built-in speaker. Use the
controls on your paired Bluetooth device as well
as those on your radio. Controls available:
•
: Short press to play/pause
•
Short press for previous track. Long press
to fast rewind.
•
Short press for next track. Long press to
fast forward.
Volume can also be adjusted – either using your
radio and/or your connected device.