Dab Radio Mode - Sharp DR-P520 User Manual

14
Tune to a station preset
You can easily access your stored preset stations
when in BestTune™ mode.
1. Short press the
preset locations (1-40), showing either stored
stations' names or frequencies, or <Empty> if
no station is stored.
2. Use the and
station preset that you would like to listen
to (1-40).
3. Press the
The radio will tune into that station based
on the best available DAB or FM signal if
available.
NOTE: If no station has been stored in the preset and
it is selected, the display will read <Preset Empty>
and the radio will return to the last selected station.
button. This reveals a list of
buttons to move to the
button to select the station.

DAB radio mode

You can deactivate BestTune™ by following the
steps in the BestTune™ section. This will allow you
to tune into DAB and FM stations independently.
Ensure the radio is in DAB mode. If not, press the
button until the display confirms DAB
mode.
If it's your first time using the radio or if the station
list is empty, the radio will auto-scan for DAB
stations, displaying a progress bar and number of
found stations. If the radio was last tuned to a DAB
station before being switched off, this station will
auto-select upon powering on.
DAB radio station scanning
With DAB radio, additional stations and services
regularly become available. Carry out a manual
scan periodically to make sure that you have the
most up-to-date station listing stored within the
memory of your radio.