Table of Contents
Advertisement
Configuring Outputs
Before you can monitor outputs, they must first be configured. Outputs can be
configured individually as discrete outputs (see
on page
Note: The Pulse and Restore to Schedule buttons only function when an output or a group
has a valid pulse time or a schedule assigned.
On the Outputs tab, you can do the following:
•
•
•
•
•
Navigating to the Auxiliary Connections-Outputs tab:
Click
tions > Outputs.
Figure 1-5 Device Management Window - Auxiliary Connections - Outputs
Note: The Output Status screen dynamically refreshes when the output status changes.
Table 3-2 Output Management Settings
Field
Energized
De-energized
100
) or collectively as a group of outputs.
46
View the current status of each output in the Discrete tab (Energized or De-
energized).
View the current status of each group of outputs in the Groups tab.
Energize or de-energize any output or group indefinitely.
Pulse any output or group. This energizes the output or group for a configured
period of time (see
Monitoring and Controlling Outputs
Restore the output to its configured schedule. A schedule is a specified time
period during which the output will be energized. (see
on page
).
31
to open the menu, then click Device Management > Auxiliary Connec-
Description
Click to energize an output for an indefinite period of time.
Click to de-energize an output for an indefinite period of time
Configuring Panel I/O and Groups
section on page
).
99
Entering a Panel Name
MPA2C3 User Manual
section
section
Advertisement
Table of Contents
