Contents - Yamaha AW4416 Tutorial

1. Make sure that the RECORDER [MONI] MIXING LAYER is selected.
2. Recall the scene number 01 "FADERS NOMINAL" provided to set faders 1
through 14 to nominal (Press the [SCENE] key, use the data dial to select
the scene number 01 "FADERS NOMINAL", move the cursor to "RECALL",
press [ENTER], select "OK" in the confirmation and press [ENTER] again).
3. Press the MIXER [VIEW] key so you can see the selected monitor channel
parameters on the display. You might also have to press the [F1] function
key to select the "CH View" page.
4. Hit the [PLAY] button and listen.
The chart below lists the contents of the "So Fine" tracks. "V.Trk" at the left side of
the chart refers to the recorder's virtual tracks (there are actually 8 virtual tracks
for each recorder track). Note that although we'll be using only the main tracks
(virtual track 1) for most of this tutorial, an alternate string take is provided on the
second virtual tracks for recorder tracks 9 and 10, and a male lead vocal track is
provided on the second virtual track of recorder track 14. Later on you'll use
these alternate takes to build a mix based around a male rather than female lead
vocal part.
1
Drums
V.Trk 1
Left
V.Trk 2
9
String
V.Trk 1
Left
Alt.
V.Trk 2 String
Left
2 3 4
Claves
Drums
& Bass
Right
E.Drm
10 11 12
String Fem. Fem.
Right Ch. 1 Ch. 2
Alt.
String
Right
Tutorial—Mixdown
5 6 7
Rthm Lead
Organ
Guitar Guitar
13 14 15
Male Lead
Ch. & Vocal
Rap (Fem)
Lead
Vocal
(Male)
— Tutorial
8
Piano
16
11